Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with silver pin headers along two edges and a small silver antenna chip

LORDWORLD

LORDWORLD Raspberry Pi Pico W Development Board Pre-Soldered Headers RP2040

SKU CH-GC3G-G2ZS6

A compact RP2040 microcontroller board with 26 GPIO pins, dual-core Arm Cortex-M0+ up to 133 MHz, onboard Wi-Fi 4 via Infineon CYW43439, and pre-soldered headers for immediate prototyping

  • Ready to code with pre-soldered headers
  • Dual-core Arm Cortex-M0+ up to 133 MHz
  • Onboard Wi-Fi 4 via Infineon CYW43439
  • 26 configurable GPIO pins for flexible projects
  • Supports C/C++ and MicroPython with full SDK

Pico W RP2040 for IoT projects

This board combines the RP2040 dual-core Cortex-M0+ microcontroller with an onboard Infineon CYW43439 wireless chip. It targets makers, students and engineers who need Wi-Fi connectivity in a compact microcontroller form factor. The 26 multi-function GPIO pins support flexible peripheral integration. C, C++ and MicroPython toolchains are supported through the official SDK.

Pre-soldered headers and wireless integration

Headers arrive pre-soldered, so the board is ready for breadboard or perfboard use without additional assembly. The Infineon CYW43439 provides 2.4 / 5 GHz Wi-Fi 4 connectivity directly on the PCB. The dual-core processor runs at up to 133 MHz, giving deterministic timing for real-time tasks alongside network operations. No separate wireless module or antenna wiring is required.

Upgrade from non-wireless Pico or bare RP2040

Developers moving from the original Pico gain built-in Wi-Fi without redesigning their pinout or codebase. The jump is worth it when a project needs cloud logging, OTA updates or remote control and the 26 GPIO pins cover the sensor or actuator count. Projects that require Bluetooth, higher throughput than Wi-Fi 4, or more than 26 I/O lines will need a different platform.

Kohokohdat

  • Ready to code with pre-soldered headers
  • Dual-core Arm Cortex-M0+ up to 133 MHz
  • Onboard Wi-Fi 4 via Infineon CYW43439
  • 26 configurable GPIO pins for flexible projects
  • Supports C/C++ and MicroPython with full SDK

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

Does the RP2040 board support 2.4 GHz and 5 GHz Wi-Fi 4?

Yes, the onboard Infineon CYW43439 chip supports 2.4 GHz and 5 GHz Wi-Fi 4 connectivity.

What physical space does the board with 26 GPIO pins need for mounting?

The board follows the standard Raspberry Pi Pico form factor, allowing direct insertion into breadboards or soldering to perfboards.

How do I start programming the dual-core 133 MHz processor in MicroPython?

Hold the BOOTSEL button while connecting USB, then copy the MicroPython UF2 file to the RPI-RP2 drive that appears.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.