نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with silver pin headers along two edges and a small silver antenna chip

LORDWORLD

LORDWORLD Raspberry Pi Pico W Development Board Pre-Soldered Headers RP2040

SKU CH-GC3G-G2ZS6

A compact RP2040 microcontroller board with 26 GPIO pins, dual-core Arm Cortex-M0+ up to 133 MHz, onboard Wi-Fi 4 via Infineon CYW43439, and pre-soldered headers for immediate prototyping

  • Ready to code with pre-soldered headers
  • Dual-core Arm Cortex-M0+ up to 133 MHz
  • Onboard Wi-Fi 4 via Infineon CYW43439
  • 26 configurable GPIO pins for flexible projects
  • Supports C/C++ and MicroPython with full SDK

Pico W RP2040 for IoT projects

This board combines the RP2040 dual-core Cortex-M0+ microcontroller with an onboard Infineon CYW43439 wireless chip. It targets makers, students and engineers who need Wi-Fi connectivity in a compact microcontroller form factor. The 26 multi-function GPIO pins support flexible peripheral integration. C, C++ and MicroPython toolchains are supported through the official SDK.

Pre-soldered headers and wireless integration

Headers arrive pre-soldered, so the board is ready for breadboard or perfboard use without additional assembly. The Infineon CYW43439 provides 2.4 / 5 GHz Wi-Fi 4 connectivity directly on the PCB. The dual-core processor runs at up to 133 MHz, giving deterministic timing for real-time tasks alongside network operations. No separate wireless module or antenna wiring is required.

Upgrade from non-wireless Pico or bare RP2040

Developers moving from the original Pico gain built-in Wi-Fi without redesigning their pinout or codebase. The jump is worth it when a project needs cloud logging, OTA updates or remote control and the 26 GPIO pins cover the sensor or actuator count. Projects that require Bluetooth, higher throughput than Wi-Fi 4, or more than 26 I/O lines will need a different platform.

أبرز المميزات

  • Ready to code with pre-soldered headers
  • Dual-core Arm Cortex-M0+ up to 133 MHz
  • Onboard Wi-Fi 4 via Infineon CYW43439
  • 26 configurable GPIO pins for flexible projects
  • Supports C/C++ and MicroPython with full SDK

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

Does the RP2040 board support 2.4 GHz and 5 GHz Wi-Fi 4?

Yes, the onboard Infineon CYW43439 chip supports 2.4 GHz and 5 GHz Wi-Fi 4 connectivity.

What physical space does the board with 26 GPIO pins need for mounting?

The board follows the standard Raspberry Pi Pico form factor, allowing direct insertion into breadboards or soldering to perfboards.

How do I start programming the dual-core 133 MHz processor in MicroPython?

Hold the BOOTSEL button while connecting USB, then copy the MicroPython UF2 file to the RPI-RP2 drive that appears.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.