Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with silver pin headers along two edges and a small silver antenna chip

LORDWORLD

LORDWORLD Raspberry Pi Pico W Development Board Pre-Soldered Headers RP2040

SKU CH-GC3G-G2ZS6

A compact RP2040 microcontroller board with 26 GPIO pins, dual-core Arm Cortex-M0+ up to 133 MHz, onboard Wi-Fi 4 via Infineon CYW43439, and pre-soldered headers for immediate prototyping

  • Ready to code with pre-soldered headers
  • Dual-core Arm Cortex-M0+ up to 133 MHz
  • Onboard Wi-Fi 4 via Infineon CYW43439
  • 26 configurable GPIO pins for flexible projects
  • Supports C/C++ and MicroPython with full SDK

Pico W RP2040 for IoT projects

This board combines the RP2040 dual-core Cortex-M0+ microcontroller with an onboard Infineon CYW43439 wireless chip. It targets makers, students and engineers who need Wi-Fi connectivity in a compact microcontroller form factor. The 26 multi-function GPIO pins support flexible peripheral integration. C, C++ and MicroPython toolchains are supported through the official SDK.

Pre-soldered headers and wireless integration

Headers arrive pre-soldered, so the board is ready for breadboard or perfboard use without additional assembly. The Infineon CYW43439 provides 2.4 / 5 GHz Wi-Fi 4 connectivity directly on the PCB. The dual-core processor runs at up to 133 MHz, giving deterministic timing for real-time tasks alongside network operations. No separate wireless module or antenna wiring is required.

Upgrade from non-wireless Pico or bare RP2040

Developers moving from the original Pico gain built-in Wi-Fi without redesigning their pinout or codebase. The jump is worth it when a project needs cloud logging, OTA updates or remote control and the 26 GPIO pins cover the sensor or actuator count. Projects that require Bluetooth, higher throughput than Wi-Fi 4, or more than 26 I/O lines will need a different platform.

Přednosti

  • Ready to code with pre-soldered headers
  • Dual-core Arm Cortex-M0+ up to 133 MHz
  • Onboard Wi-Fi 4 via Infineon CYW43439
  • 26 configurable GPIO pins for flexible projects
  • Supports C/C++ and MicroPython with full SDK

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

Does the RP2040 board support 2.4 GHz and 5 GHz Wi-Fi 4?

Yes, the onboard Infineon CYW43439 chip supports 2.4 GHz and 5 GHz Wi-Fi 4 connectivity.

What physical space does the board with 26 GPIO pins need for mounting?

The board follows the standard Raspberry Pi Pico form factor, allowing direct insertion into breadboards or soldering to perfboards.

How do I start programming the dual-core 133 MHz processor in MicroPython?

Hold the BOOTSEL button while connecting USB, then copy the MicroPython UF2 file to the RPI-RP2 drive that appears.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.