SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Maxtor
A 300 GB 7200 RPM IDE desktop drive with 16 MB cache and fluid dynamic bearing motor for quiet operation
This Maxtor DiamondMax 10 drive provides 300GB of storage on an IDE Ultra ATA133 connection. It suits owners of legacy desktop systems that still use 40-pin ribbon cables. The 7200 RPM spindle and 16MB cache deliver responsive performance for period-correct operating systems and applications. Builders restoring vintage hardware will find the 3.5 inch form factor a direct fit for standard drive bays.
The unit ships as a bare drive without cables, mounting screws or software media. Installers must supply their own IDE data cable and 4-pin Molex power connector. No driver disc or diagnostic utility is included, so the host BIOS or operating system handles detection natively. This packaging keeps the purchase focused on the storage hardware itself.
A fluid dynamic bearing motor reduces acoustic output during seek and idle operation. The Shock Protection System and Data Protection System are designed to guard platters and heads against physical impact and write errors. Average seek time is rated at 9ms with 4.17ms average latency, reflecting the mechanical limits of the platform. RoHS compliance confirms restricted substance limits are met.
| Brand | Maxtor |
|---|---|
| Series | DiamondMax 10 |
| Model | 6L300R0 |
| Packaging | Bare Drive |
| Interface | IDE Ultra ATA133 / ATA-7 |
| Capacity | 300GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 9ms |
| Average Latency | 4.17ms |
| Features | Fluid dynamic bearing motor for quiet operation RoHS Compliant (Restriction of Hazardous Substances) Improved reliability with: Shock Protection System Data Protection System |
| Form Factor | 3.5" |
| Lähetyspaino | 0.68 kg |
| Pakkauksen mitat | 203 × 152 × 51 mm |
The fluid dynamic bearing motor is a sealed, non-serviceable part designed for the drive's full service life and has no scheduled replacement interval.
The IDE Ultra ATA133 interface caps burst transfers at 133 MB/s, so that ceiling is reached before the 7200 RPM platters or 16 MB cache can become the bottleneck.
The fluid dynamic bearing motor keeps acoustic output low, while typical 3.5" 7200 RPM mechanics draw modest power and generate moderate heat under continuous use.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?