نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Silver 3.5 inch bare hard drive with circuit board visible

Maxtor

Maxtor DiamondMax 10 6L300R0 300GB 7200 RPM 16MB IDE Ultra ATA133 3.5" internal hard drive

SKU CH-SHK7-FRBT5 MPN 6L300R0

A 300 GB 7200 RPM IDE desktop drive with 16 MB cache and fluid dynamic bearing motor for quiet operation

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity300GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time9ms
  • 300GB capacity stores large file collections
  • 7200 RPM spindle speed enables quick data access
  • 16MB cache buffer smooths read and write operations
  • Fluid dynamic bearing motor reduces operational noise
  • Shock and Data Protection Systems guard against data loss

Capacity and interface

This Maxtor DiamondMax 10 drive provides 300GB of storage on an IDE Ultra ATA133 connection. It suits owners of legacy desktop systems that still use 40-pin ribbon cables. The 7200 RPM spindle and 16MB cache deliver responsive performance for period-correct operating systems and applications. Builders restoring vintage hardware will find the 3.5 inch form factor a direct fit for standard drive bays.

Bare-drive packaging

The unit ships as a bare drive without cables, mounting screws or software media. Installers must supply their own IDE data cable and 4-pin Molex power connector. No driver disc or diagnostic utility is included, so the host BIOS or operating system handles detection natively. This packaging keeps the purchase focused on the storage hardware itself.

Mechanical reliability

A fluid dynamic bearing motor reduces acoustic output during seek and idle operation. The Shock Protection System and Data Protection System are designed to guard platters and heads against physical impact and write errors. Average seek time is rated at 9ms with 4.17ms average latency, reflecting the mechanical limits of the platform. RoHS compliance confirms restricted substance limits are met.

أبرز المميزات

  • 300GB capacity stores large file collections
  • 7200 RPM spindle speed enables quick data access
  • 16MB cache buffer smooths read and write operations
  • Fluid dynamic bearing motor reduces operational noise
  • Shock and Data Protection Systems guard against data loss

المواصفات

BrandMaxtor
SeriesDiamondMax 10
Model6L300R0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity300GB
RPM7200 RPM
Cache16MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesFluid dynamic bearing motor for quiet operation
RoHS Compliant (Restriction of Hazardous Substances)
Improved reliability with:
Shock Protection System
Data Protection System
Form Factor3.5"
وزن الشحنة0.68 kg
أبعاد الطرد203 × 152 × 51 mm

أسئلة حول هذا المنتج

How often should I plan to replace the fluid dynamic bearing motor in the 7200 RPM DiamondMax 10?

The fluid dynamic bearing motor is a sealed, non-serviceable part designed for the drive's full service life and has no scheduled replacement interval.

Which specification limits sustained throughput first on the IDE Ultra ATA133 interface?

The IDE Ultra ATA133 interface caps burst transfers at 133 MB/s, so that ceiling is reached before the 7200 RPM platters or 16 MB cache can become the bottleneck.

How much heat and noise does the 3.5" 300GB drive produce during all-day operation?

The fluid dynamic bearing motor keeps acoustic output low, while typical 3.5" 7200 RPM mechanics draw modest power and generate moderate heat under continuous use.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.