SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Maxtor
500 GB desktop drive spinning at 7200 RPM with 16 MB cache and SATA 3.0Gb/s interface
The Maxtor MaXLine Pro 500 7H500F0 is a 500GB desktop internal hard drive built for systems that use the SATA 3.0Gb/s interface. It spins at 7200 RPM with a 16MB cache to handle everyday storage workloads. Features such as Native Command Queuing and Rotational Vibration Compensation help maintain consistent operation. The bare-drive packaging suits integrators and upgrade installations.
This drive suits builders repairing or expanding older desktops, servers or external enclosures that specifically require a 3.5-inch SATA 3.0Gb/s mechanical drive. The 7200 RPM spindle speed and 8.5ms average seek time support general-purpose file storage and boot duties. Buyers who need a faster SATA 6.0Gb/s interface or a solid-state form factor should look at something else. The bare drive ships without cables or mounting brackets.
The single specification that decides fitment is the SATA 3.0Gb/s interface, which must match the host controller on the motherboard or add-in card. A 3.0Gb/s drive will negotiate down on a 6.0Gb/s port but cannot exceed its native 3.0Gb/s transfer ceiling. Verify that the system provides a standard SATA data and power connection for this 3.5-inch unit. No other interface or protocol is supported by this model.
| Brand | Maxtor |
|---|---|
| Series | MaXLine Pro 500 |
| Model | 7H500F0 |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 500GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.5ms |
| Average Latency | 4.17ms |
| Features | Native Command Queuing Rotational Vibration Compensation Accelerated Error Recovery Internal EDC Fly Height Adjust technology Easy Code Load Pattern Fill Expanded Drive Self Test RoHS compliant |
| Form Factor | 3.5" |
| Lähetyspaino | 0.73 kg |
| Pakkauksen mitat | 152 × 102 × 25 mm |
The 7200 RPM rotation reduces average latency to 4.17 ms and combines with the 16 MB cache to deliver quicker file access and smoother multitasking than slower-spinning drives.
The SATA 3.0 Gb/s link sets the maximum interface bandwidth; sustained transfer rates depend on the 7200 RPM platters and 16 MB cache rather than the interface ceiling.
Yes, the 3.5 inch form factor matches standard desktop drive bays and the SATA data and power connectors are the common ones used on current motherboards and power supplies.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?