SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
Maxtor
500 GB desktop drive spinning at 7200 RPM with 16 MB cache and SATA 3.0Gb/s interface
The Maxtor MaXLine Pro 500 7H500F0 is a 500GB desktop internal hard drive built for systems that use the SATA 3.0Gb/s interface. It spins at 7200 RPM with a 16MB cache to handle everyday storage workloads. Features such as Native Command Queuing and Rotational Vibration Compensation help maintain consistent operation. The bare-drive packaging suits integrators and upgrade installations.
This drive suits builders repairing or expanding older desktops, servers or external enclosures that specifically require a 3.5-inch SATA 3.0Gb/s mechanical drive. The 7200 RPM spindle speed and 8.5ms average seek time support general-purpose file storage and boot duties. Buyers who need a faster SATA 6.0Gb/s interface or a solid-state form factor should look at something else. The bare drive ships without cables or mounting brackets.
The single specification that decides fitment is the SATA 3.0Gb/s interface, which must match the host controller on the motherboard or add-in card. A 3.0Gb/s drive will negotiate down on a 6.0Gb/s port but cannot exceed its native 3.0Gb/s transfer ceiling. Verify that the system provides a standard SATA data and power connection for this 3.5-inch unit. No other interface or protocol is supported by this model.
| Brand | Maxtor |
|---|---|
| Series | MaXLine Pro 500 |
| Model | 7H500F0 |
| Packaging | Bare Drive |
| Interface | SATA 3.0Gb/s |
| Capacity | 500GB |
| RPM | 7200 RPM |
| Cache | 16MB |
| Average Seek Time | 8.5ms |
| Average Latency | 4.17ms |
| Features | Native Command Queuing Rotational Vibration Compensation Accelerated Error Recovery Internal EDC Fly Height Adjust technology Easy Code Load Pattern Fill Expanded Drive Self Test RoHS compliant |
| Form Factor | 3.5" |
| Fraktvikt | 0.73 kg |
| Paketstorlek | 152 × 102 × 25 mm |
The 7200 RPM rotation reduces average latency to 4.17 ms and combines with the 16 MB cache to deliver quicker file access and smoother multitasking than slower-spinning drives.
The SATA 3.0 Gb/s link sets the maximum interface bandwidth; sustained transfer rates depend on the 7200 RPM platters and 16 MB cache rather than the interface ceiling.
Yes, the 3.5 inch form factor matches standard desktop drive bays and the SATA data and power connectors are the common ones used on current motherboards and power supplies.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Inga språk matchar.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?