Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green circuit boards with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 128GB 2x64GB DDR4 2933 ECC LRDIMM 4Rx4 1.2V 288-PIN server RAM

SKU CH-MKJ7-MQGPE

128 GB DDR4 2933 MHz ECC load-reduced dual-rank server memory kit, 2 × 64 GB at 1.2 V

  • Capacity128GB (2 x 64GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 128GB total capacity with two 64GB modules
  • ECC error correction protects critical server data
  • Load Reduced design lowers electrical load on memory bus
  • 2933MHz DDR4 speed rated at PC4-23400 standard
  • 2V operation reduces power draw per module

Server Memory Kit for High-Density DDR4 Platforms

This 128GB kit uses two 64GB DDR4 2933 ECC LRDIMM modules built with major OEM Samsung, Micron or Hynix chips. It targets servers and workstations that require load-reduced registered memory at PC4-23400 speed. It is not for desktop PCs or consumer motherboards that only accept unbuffered UDIMMs.

Installation Requires Matching LRDIMM Slots

Each 288-pin module installs in standard DDR4 DIMM slots, but the platform must support load-reduced registered DIMMs and 4Rx4 organisation. Mixing LRDIMMs with RDIMMs or UDIMMs will prevent boot. BIOS settings must reflect the registered and ECC configuration; otherwise the system will not recognise the full 128GB capacity.

DDR4 2933 Bandwidth and Rank Limits Define

The PC4-23400 interface caps peak transfer rate at the rated speed, and 4Rx4 density increases electrical load on the memory controller. Maximum usable capacity depends on the CPU memory-channel limit and the motherboard qualified-vendor list; exceeding either prevents the kit from operating at 2933MHz.

Kohokohdat

  • 128GB total capacity with two 64GB modules
  • ECC error correction protects critical server data
  • Load Reduced design lowers electrical load on memory bus
  • 2933MHz DDR4 speed rated at PC4-23400 standard
  • 2V operation reduces power draw per module

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: ML23400-944K2-SM-SYS-5019P-M
Part NumberPart#: ML23400-944K2-SM-SYS-5019P-M
Capacity128GB (2 x 64GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

How do I verify the kit is running at 2933 MHz with CAS 21 after installation?

Enter the server BIOS or use a tool such as dmidecode to confirm the modules report DDR4 2933 (PC4-23400) at CL 21 and 1.2 V on all 288 pins.

What ships in the box and what must I source separately?

The kit includes two 64 GB DDR4 2933 ECC LRDIMM modules (part ML23400-944K2-SM-SYS-5019P-M); no cables, brackets or additional components are supplied.

Should I choose the 2 x 64 GB 4Rx4 kit or a different capacity for my server?

Select this 128 GB (2 x 64 GB) 4Rx4 LRDIMM kit when your platform requires DDR4 2933 registered ECC memory in a two-module population.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.