Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 128GB (4x32GB) DDR5 5600 ECC RDIMM CL46 1.1V GIGABYTE MZ33-CP1 memory upgrade

SKU CH-0388-9PA9M

128 GB DDR5-5600 registered ECC RDIMM kit in four 32 GB modules at CL46 and 1.1 V, validated for the Gigabyte MZ33-CP1 motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Näytä 24 muuta kokoonpanoa
  • 128 GB capacity in a 4 × 32 GB kit for full server memory population
  • DDR5 5600 speed with CL46 latency for rated performance on compatible boards
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation matches the motherboard's voltage requirement for stable operation
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots exactly

Exact-match upgrade kit

This 128GB kit contains four 32GB DDR5 5600 registered ECC RDIMMs built to the precise rank, voltage and timing the GIGABYTE MZ33-CP1 memory controller expects so the server recognises full capacity and runs at rated speed. It is intended for administrators upgrading that specific motherboard with a validated 2Rx8 1.1V configuration.

2Rx8 registered ECC at 1.1V

The single specification that decides fitment is the 2Rx8 registered ECC organisation combined with 1.1V CL46 timing on a 288-pin DDR5 RDIMM because the MZ33-CP1 requires exactly that electrical and mechanical profile and will not accept UDIMM SODIMM or different rank layouts.

No heat spreader and lifetime support

Modules ship without a heat spreader to maintain standard RDIMM height for dense server chassis while the lifetime replacement warranty and US-based technical support provide long-term service coverage for production environments. Buyers needing UDIMM SODIMM or non-ECC memory should look elsewhere.

Kohokohdat

  • 128 GB capacity in a 4 × 32 GB kit for full server memory population
  • DDR5 5600 speed with CL46 latency for rated performance on compatible boards
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation matches the motherboard's voltage requirement for stable operation
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 memory slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this DDR5 5600 kit run at its rated 5600 speed once installed in the GIGABYTE MZ33-CP1?

Yes, the kit is spec-matched to the board's memory controller so all four 32 GB modules are recognised at full capacity and operate at the rated DDR5 5600 speed.

What does the PC5-44800 label mean for real-world bandwidth on this motherboard?

PC5-44800 is the peak transfer rate of DDR5 5600; the registered design lets every slot stay populated at that rate without down-clocking.

Does the 288-pin RDIMM form factor fit the MZ33-CP1 DIMM slots without adapters?

The 288-pin registered DIMM matches the board's native slot keying exactly, so no adapter or converter is needed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.