NEMIX RAM 16GB DDR4 2933MHz CL21 1.2V 260-Pin SODIMM Laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
16 GB DDR5 desktop memory module running at 5200 MHz with CL42 latency and 1.1 V operation
Capacity 16GB
This NEMIX RAM module provides 16GB of DDR5 memory in a single 288-pin UDIMM package. It is built for desktop PCs and workstations that accept non-ECC unbuffered DDR5 DIMMs. The stick runs at 5200 MT/s with a CL42 latency and a 1.1V operating voltage. No heat spreader or LEDs are fitted.
The module operates at the standard 1.1V DDR5 voltage, which helps limit heat output during extended workloads. Without a heat spreader, thermal performance relies on case airflow across the bare PCB. The 1Rx8 organisation and CL42 timing deliver consistent throughput for typical desktop and workstation tasks over long sessions.
Verify that your motherboard supports DDR5 UDIMMs at 5200 MT/s and can run memory at 1.1V. Confirm an available 288-pin slot and that the board does not require ECC or registered modules. Consult the motherboard manual for any specific population rules or BIOS updates needed for DDR5 compatibility.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR5 Orignial Series 288-Pin Non-ECC Unbuffered UDIMM Desktop PC Memory |
| Model | Original Series DDR5 Desktop PC Memory Solutions |
| Part Number | MD41600-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard, Desktop, Workstation, Gaming Machine Compatible |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, this is a DDR5 5200 CL42 1.10V 288-pin UDIMM. It fits any desktop board with a DDR5 slot that accepts non-ECC unbuffered memory.
No, the module ships without a heat spreader and has no LEDs. It is a plain green PCB for standard clearance.
5200 MT/s is the data rate and CL42 is the CAS latency; together they set the baseline speed for DDR5 systems that run at JEDEC defaults.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?