Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5200 CL42 1.1V 288-pin desktop RAM

SKU CH-0Z68-JQJ25

16 GB DDR5 desktop memory module running at 5200 MHz with CL42 latency and 1.1 V operation

  • Capacity16GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5200 (PC5 41600)
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 16GB

  • 16 GB capacity for demanding multitasking workloads
  • DDR5 5200 speed moves data faster than older generations
  • CL42 latency keeps response times low
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

Capacity and Form Factor

This NEMIX RAM module provides 16GB of DDR5 memory in a single 288-pin UDIMM package. It is built for desktop PCs and workstations that accept non-ECC unbuffered DDR5 DIMMs. The stick runs at 5200 MT/s with a CL42 latency and a 1.1V operating voltage. No heat spreader or LEDs are fitted.

Sustained Load Behaviour

The module operates at the standard 1.1V DDR5 voltage, which helps limit heat output during extended workloads. Without a heat spreader, thermal performance relies on case airflow across the bare PCB. The 1Rx8 organisation and CL42 timing deliver consistent throughput for typical desktop and workstation tasks over long sessions.

Pre-Installation Checks

Verify that your motherboard supports DDR5 UDIMMs at 5200 MT/s and can run memory at 1.1V. Confirm an available 288-pin slot and that the board does not require ECC or registered modules. Consult the motherboard manual for any specific population rules or BIOS updates needed for DDR5 compatibility.

Pluspunten

  • 16 GB capacity for demanding multitasking workloads
  • DDR5 5200 speed moves data faster than older generations
  • CL42 latency keeps response times low
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM DDR5 Orignial Series 288-Pin Non-ECC Unbuffered UDIMM Desktop PC Memory
ModelOriginal Series DDR5 Desktop PC Memory Solutions
Part NumberMD41600-618K1
Capacity16GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5200 (PC5 41600)
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard, Desktop, Workstation, Gaming Machine Compatible
LED ColorNone

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this 16 GB module work in a motherboard that only supports DDR5?

Yes, this is a DDR5 5200 CL42 1.10V 288-pin UDIMM. It fits any desktop board with a DDR5 slot that accepts non-ECC unbuffered memory.

Does the kit include a heat spreader or RGB lighting?

No, the module ships without a heat spreader and has no LEDs. It is a plain green PCB for standard clearance.

What do the numbers 5200 and CL42 mean for everyday use?

5200 MT/s is the data rate and CL42 is the CAS latency; together they set the baseline speed for DDR5 systems that run at JEDEC defaults.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.