NEMIX RAM 16GB DDR4 2933MHz CL21 1.2V 260-Pin SODIMM Laptop RAM
- 16GB
- 260-Pin DDR4 SO-DIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
NEMIX RAM
16 GB DDR5 desktop memory module running at 5200 MHz with CL42 latency and 1.1 V operation
Capacity 16GB
This NEMIX RAM module provides 16GB of DDR5 memory in a single 288-pin UDIMM package. It is built for desktop PCs and workstations that accept non-ECC unbuffered DDR5 DIMMs. The stick runs at 5200 MT/s with a CL42 latency and a 1.1V operating voltage. No heat spreader or LEDs are fitted.
The module operates at the standard 1.1V DDR5 voltage, which helps limit heat output during extended workloads. Without a heat spreader, thermal performance relies on case airflow across the bare PCB. The 1Rx8 organisation and CL42 timing deliver consistent throughput for typical desktop and workstation tasks over long sessions.
Verify that your motherboard supports DDR5 UDIMMs at 5200 MT/s and can run memory at 1.1V. Confirm an available 288-pin slot and that the board does not require ECC or registered modules. Consult the motherboard manual for any specific population rules or BIOS updates needed for DDR5 compatibility.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR5 Orignial Series 288-Pin Non-ECC Unbuffered UDIMM Desktop PC Memory |
| Model | Original Series DDR5 Desktop PC Memory Solutions |
| Part Number | MD41600-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 UDIMM |
| Speed | DDR5 5200 (PC5 41600) |
| CAS Latency | CL42 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard, Desktop, Workstation, Gaming Machine Compatible |
| LED Color | None |
Altre versioni di questo modello
Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.
Yes, this is a DDR5 5200 CL42 1.10V 288-pin UDIMM. It fits any desktop board with a DDR5 slot that accepts non-ECC unbuffered memory.
No, the module ships without a heat spreader and has no LEDs. It is a plain green PCB for standard clearance.
5200 MT/s is the data rate and CL42 is the CAS latency; together they set the baseline speed for DDR5 systems that run at JEDEC defaults.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Nessuna lingua corrisponde.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?