Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 ECC Registered RDIMM memory upgrade

SKU CH-7PMK-WED30

16 GB DDR5 5600 CL46 1Rx8 ECC Registered RDIMM for Supermicro H13SVW-NT servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Speed 5600MHz

  • 16 GB DDR5 5600 CL46 capacity ready for server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Supermicro H13SVW-NT boards
  • 1Rx8 rank layout matches controller expectations for full-speed recognition

Server-grade DDR5 RDIMM upgrade

This 16 GB DDR5-5600 registered ECC module is built for the Supermicro H13SVW-NT motherboard. It targets administrators who need exact-spec memory to keep production servers running at rated speed without configuration trial and error.

Registered 288-pin form factor with no heat spreader

The RDIMM layout buffers address and command signals so every slot can be populated at full capacity. A 1.10 V operating voltage and CL46 timing match the board's memory controller requirements, while the bare PCB fits tight server chassis where tall spreaders would block airflow.

DDR5 platform constraints apply

Registered ECC modules only work in chipsets and CPUs that support the registered protocol; they will not function in desktop or workstation boards that expect unbuffered DIMMs. Population rules and maximum capacity per channel are defined by the motherboard manual, so verify the supported configuration before installing.

Kohokohdat

  • 16 GB DDR5 5600 CL46 capacity ready for server workloads
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Supermicro H13SVW-NT boards
  • 1Rx8 rank layout matches controller expectations for full-speed recognition

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR5 speed does the PC5-44800 rating deliver on the Supermicro H13SVW-NT?

The PC5-44800 rating corresponds to DDR5 5600 MT/s, which this RDIMM runs at on the H13SVW-NT when the board's memory controller is set to its rated speed.

Will the 288-pin RDIMM seat correctly in the H13SVW-NT's DIMM slots?

Yes, the module uses the 288-pin Registered RDIMM form factor that the H13SVW-NT requires; it is not a UDIMM or SODIMM, so it matches the board's keying and slot dimensions.

What population rule should I follow when installing this 1Rx8 RDIMM on the H13SVW-NT?

Consult the H13SVW-NT manual for the approved DIMM population order; the board's memory controller expects a specific slot sequence to run every slot fully populated at 5600 MT/s.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.