Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green circuit boards with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 6400 CL52 ECC RDIMM X14SDV-42C-SP3F memory upgrade

SKU CH-QH7Q-M2D3P

192 GB DDR5 6400 CL52 ECC registered RDIMM kit (2×96 GB, 1.1 V, 2Rx4) validated for the Supermicro X14SDV-42C-SP3F motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192GB total capacity for memory-intensive workloads using 2x96GB modules
  • DDR5 6400 speed with CL52 latency for responsive server performance
  • ECC registered design corrects single-bit errors preventing silent data corruption
  • 1V operation matches platform specifications for stable full-population deployment
  • 288-pin RDIMM form factor verified compatible with Supermicro X14SDV-42C-SP3F

Exact-fit 192 GB DDR5 RDIMM kit

This 192 GB kit contains two 96 GB DDR5 6400 registered ECC RDIMMs built for the Supermicro X14SDV-42C-SP3F motherboard. It targets server administrators who need maximum capacity per channel with error correction and registered buffering for stable operation under sustained loads.

Straightforward installation

The 288-pin RDIMMs seat in the board's DDR5 slots exactly as the manual specifies; follow the manufacturer's population order to ensure full recognition. Mismatched rank configuration, wrong voltage setting or skipping the population sequence are the typical reasons a module fails to initialise at rated speed.

192 GB registered ECC capacity for dense workloads

Two 96 GB dual-rank modules deliver 192 GB at 6400 MT/s with CL52 latency and 1.1 V operation, handling large virtualisation clusters, in-memory databases and heavy compute jobs. Capacity runs out when the board's maximum supported memory per socket or total slot count is exceeded, requiring a platform with higher density support.

Kohokohdat

  • 192GB total capacity for memory-intensive workloads using 2x96GB modules
  • DDR5 6400 speed with CL52 latency for responsive server performance
  • ECC registered design corrects single-bit errors preventing silent data corruption
  • 1V operation matches platform specifications for stable full-population deployment
  • 288-pin RDIMM form factor verified compatible with Supermicro X14SDV-42C-SP3F

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the kit is running at DDR5 6400 CL52 with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to confirm each 96GB module shows 6400 MT/s, CL52 timings, 1.1V operation, Registered ECC mode, and 2Rx4 organization; the server POST should also report the full 192GB capacity without errors.

What exactly ships in the box and is anything else required to install it?

The package contains two 96GB DDR5 6400 CL52 288-pin ECC Registered RDIMM modules (part MR51200-9624K2); no heat spreaders, cables, or additional hardware are included — only a compatible Supermicro X14SDV-42C-SP3F motherboard with available RDIMM slots is needed.

Why choose this 192GB 2x96GB DDR5 6400 CL52 kit over other capacities or speeds?

This exact 192GB (2x96GB) kit matches the Supermicro X14SDV-42C-SP3F motherboard's validated DDR5 6400 PC5-51200 2Rx4 Registered ECC 1.1V specification, ensuring full-capacity recognition, rated speed operation, and compliance with the board's memory-population rules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.