Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM DDR5 6400 CL52 128GB (4x32GB) ECC Registered RDIMM memory upgrade

SKU CH-V2G0-6NKSS

A 128 GB DDR5 server memory kit with four 32 GB registered ECC modules running at 6400 MT/s and CL52 latency for the Supermicro X14SDV-36CE-SP3F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB capacity in a matched 4 x 32 GB kit for full server density
  • DDR5-6400 speed with CL52 latency runs at rated frequency on supported boards
  • Registered ECC design offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation matches the platform spec for stable fully populated slots
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36CE-SP3F motherboard exactly

Server-grade DDR5 RDIMM kit

This 128 GB kit provides four 32 GB DDR5-6400 registered ECC modules built for 24/7 server workloads. The modules run at 1.1 V with a CL52 latency and a 2Rx4 organisation. They target administrators who need maximum capacity on a qualified Supermicro platform.

288-pin registered ECC form factor

The memory controller on the X14SDV-36CE-SP3F motherboard requires registered RDIMMs with ECC; unbuffered UDIMMs or SODIMMs will not be recognised. This kit matches the board's exact pin count, voltage and rank layout so every slot populates at the rated 6400 MT/s speed.

Four-slot population on a validated motherboard

Installing the full kit fills four DIMM slots and delivers 128 GB of error-correcting capacity without overclocking. The registered design reduces electrical load on the controller, while ECC corrects single-bit errors before they affect data. Consult the motherboard manual for the approved population order before installation.

Kohokohdat

  • 128 GB capacity in a matched 4 x 32 GB kit for full server density
  • DDR5-6400 speed with CL52 latency runs at rated frequency on supported boards
  • Registered ECC design offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation matches the platform spec for stable fully populated slots
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36CE-SP3F motherboard exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the DDR5 6400 speed mean once the kit is installed in my Supermicro X14SDV-36CE-SP3F?

The modules run at 6400 MT/s (PC5-51200) with CL52 latency at 1.1 V, so the memory controller recognises all 128 GB at the rated frequency without manual tuning.

How does the 288-pin RDIMM registered interface affect what the board can use?

The registered design buffers address and command signals, letting the motherboard run all four slots fully populated at 6400 MT/s while ECC corrects single-bit errors on the fly.

What physical clearance do the 32 GB 2Rx4 modules need to fit the Supermicro board?

Each stick is a standard 288-pin DDR5 RDIMM without a heat spreader, so it fits the regular DIMM slots on the X14SDV-36CE-SP3F following the board's population order.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.