Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Four green DDR5 RDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM DDR5 6400 CL52 128GB (4x32GB) ECC Registered RDIMM memory upgrade

SKU CH-V2G0-6NKSS

A 128 GB DDR5 server memory kit with four 32 GB registered ECC modules running at 6400 MT/s and CL52 latency for the Supermicro X14SDV-36CE-SP3F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

  • 128 GB capacity in a matched 4 x 32 GB kit for full server density
  • DDR5-6400 speed with CL52 latency runs at rated frequency on supported boards
  • Registered ECC design offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation matches the platform spec for stable fully populated slots
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36CE-SP3F motherboard exactly

Server-grade DDR5 RDIMM kit

This 128 GB kit provides four 32 GB DDR5-6400 registered ECC modules built for 24/7 server workloads. The modules run at 1.1 V with a CL52 latency and a 2Rx4 organisation. They target administrators who need maximum capacity on a qualified Supermicro platform.

288-pin registered ECC form factor

The memory controller on the X14SDV-36CE-SP3F motherboard requires registered RDIMMs with ECC; unbuffered UDIMMs or SODIMMs will not be recognised. This kit matches the board's exact pin count, voltage and rank layout so every slot populates at the rated 6400 MT/s speed.

Four-slot population on a validated motherboard

Installing the full kit fills four DIMM slots and delivers 128 GB of error-correcting capacity without overclocking. The registered design reduces electrical load on the controller, while ECC corrects single-bit errors before they affect data. Consult the motherboard manual for the approved population order before installation.

Prednosti

  • 128 GB capacity in a matched 4 x 32 GB kit for full server density
  • DDR5-6400 speed with CL52 latency runs at rated frequency on supported boards
  • Registered ECC design offloads the memory controller and corrects single-bit errors automatically
  • 1 V operation matches the platform spec for stable fully populated slots
  • 288-pin RDIMM form factor fits the Supermicro X14SDV-36CE-SP3F motherboard exactly

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

What does the DDR5 6400 speed mean once the kit is installed in my Supermicro X14SDV-36CE-SP3F?

The modules run at 6400 MT/s (PC5-51200) with CL52 latency at 1.1 V, so the memory controller recognises all 128 GB at the rated frequency without manual tuning.

How does the 288-pin RDIMM registered interface affect what the board can use?

The registered design buffers address and command signals, letting the motherboard run all four slots fully populated at 6400 MT/s while ECC corrects single-bit errors on the fly.

What physical clearance do the 32 GB 2Rx4 modules need to fit the Supermicro board?

Each stick is a standard 288-pin DDR5 RDIMM without a heat spreader, so it fits the regular DIMM slots on the X14SDV-36CE-SP3F following the board's population order.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.