Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 192GB (4x48GB) DDR5-6400 ECC Registered RDIMM CL52 1.1V 2Rx8 GIGABYTE MZ23-SU0 memory upgrade

SKU CH-YKP3-YC8N6

A 192GB DDR5-6400 ECC registered RDIMM kit built to the exact rank, voltage and timing the GIGABYTE MZ23-SU0 memory controller expects for full-capacity operation

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 4X48GB

Näytä 24 muuta kokoonpanoa
  • 192 GB total capacity for memory-intensive server workloads using four 48 GB modules
  • DDR5-6400 speed with CL52 latency matches the board's rated timing for full-speed operation
  • Registered ECC design corrects single-bit errors and buffers signals for stable full-population runs
  • 1 V operating voltage meets the DDR5 standard for lower power draw per module
  • 288-pin RDIMM form factor fits the GIGABYTE MZ23-SU0 motherboard's memory slots exactly

Exact-match server upgrade

This 192GB kit contains four 48GB DDR5 RDIMMs rated at 6400MHz with CL52 latency and 1.1V operation. It is built specifically for the GIGABYTE MZ23-SU0 motherboard so the memory controller recognises the full capacity at rated speed without manual tuning.

Sustained enterprise stability

Registered architecture buffers each command, allowing all slots to stay fully populated under continuous load while ECC corrects single-bit errors in real time. The 2Rx8 organisation and standard voltage keep signal integrity consistent during long compute runs without thermal throttling concerns.

Dense 288-pin RDIMM form factor

Modules use a bare-board design without heat spreaders, fitting tightly spaced server DIMM slots and allowing unrestricted airflow across the PCB. The 288-pin registered interface matches the board's keying exactly, so installation follows the manual's population order with no mechanical interference.

Kohokohdat

  • 192 GB total capacity for memory-intensive server workloads using four 48 GB modules
  • DDR5-6400 speed with CL52 latency matches the board's rated timing for full-speed operation
  • Registered ECC design corrects single-bit errors and buffers signals for stable full-population runs
  • 1 V operating voltage meets the DDR5 standard for lower power draw per module
  • 288-pin RDIMM form factor fits the GIGABYTE MZ23-SU0 motherboard's memory slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K4
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 4X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does the 1.10V CL52 DDR5-6400 kit draw when the server runs all day at full load?

These modules operate at 1.10 V with CL52 latency at DDR5-6400, and the registered design reduces electrical load on the memory controller for stable full-capacity operation.

What must the motherboard provide for this 4 x 48 GB 288-pin RDIMM kit to function?

The board needs four DDR5 RDIMM slots that support 2Rx8 registered ECC DIMMs at 6400 MT/s and 1.10 V, plus a memory controller that accepts 192 GB total capacity.

Can I populate the remaining slots on my MZ23-SU0 with different-capacity DDR5 RDIMMs while keeping this kit installed?

The kit is validated for the MZ23-SU0 at 6400 MT/s CL52 1.10 V; mixing other DDR5 RDIMMs requires matching voltage, rank, and population rules from the motherboard manual.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.