Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 384GB (6x64GB) DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H13SSH-E memory upgrade

SKU CH-HRKR-8AANE

A 384 GB DDR5 kit of six 64 GB registered ECC modules at 4800 MT/s, CL40 and 1.1 V, built to populate every slot on the Supermicro H13SSH-E

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

Näytä 30 muuta kokoonpanoa
  • 384 GB total capacity from six 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency runs at rated frequency on the H13SSH-E
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors in flight
  • 1 V operation and 2Rx4 organisation match the board's exact electrical requirements
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E DIMM slots without adapters

384GB DDR5 ECC RDIMM kit for Supermicro H13SSH-E

This six-module kit delivers 384GB of registered ECC DDR5 memory built to the exact rank, voltage and timing the Supermicro H13SSH-E memory controller expects. Each 64GB module runs at 4800 MT/s with CL40 latency at 1.1V, allowing the board to recognise full capacity and operate at rated speed without manual tuning.

Thermals power and noise in normal server use

The modules carry no heat spreader, relying on chassis airflow to maintain operating temperature within JEDEC limits for registered DDR5. Registered buffering reduces electrical load on the memory controller, keeping power draw predictable across all six slots. Silent operation is inherent because no active cooling is attached to the DIMMs themselves.

What the bundled kit changes for deployment

The package supplies six matched 64GB RDIMMs in a single validated kit, eliminating the risk of mixing incompatible ranks or voltages that can prevent boot or limit capacity. ECC and registered architecture work together to correct single-bit errors on the fly and offload the controller, reducing unplanned reboots in production workloads. Installers must still follow the motherboard manual for approved population order and maximum supported capacity per channel.

Kohokohdat

  • 384 GB total capacity from six 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency runs at rated frequency on the H13SSH-E
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors in flight
  • 1 V operation and 2Rx4 organisation match the board's exact electrical requirements
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E DIMM slots without adapters

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install these 288-pin DDR5 RDIMMs in the Supermicro H13SSH-E and which population step is often missed?

Power down, open the chassis, and insert each 64 GB module into the slots specified by the motherboard manual for a six-DIMM configuration; the step most often missed is following the exact population order so the memory controller recognises all 384 GB at 4800 MT/s.

What maintenance or replacement will this 2Rx4 ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; replacement is only necessary if a module fails, at which point the lifetime warranty covers a swap.

What limit appears first when the kit runs at 4800 MT/s CL40 1.1 V under sustained load?

The registered buffer and ECC logic keep signal integrity stable, so the first practical limit is the motherboard's maximum supported capacity and slot count rather than the memory's own timing or voltage ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.