Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5-5600 ECC RDIMM 384GB (8×48GB) CL46 1.1V 2Rx8 Supermicro H14DST-F

SKU CH-MDGF-BTJGR

Eight 48 GB DDR5-5600 RDIMMs deliver 384 GB of registered ECC memory at 1.1 V CL46 for the Supermicro H14DST-F motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

Näytä 30 muuta kokoonpanoa
  • 384 GB total capacity lets you fully populate the server for memory-intensive workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the H14DST-F platform
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation matches the board's voltage requirement for stable full-capacity operation
  • Eight 48 GB 2Rx8 modules in a 288-pin RDIMM kit ensure exact-fit compatibility

384GB DDR5-5600 ECC RDIMM Kit

This NEMIX RAM kit delivers 384GB across eight 48GB DDR5-5600 RDIMMs. Registered ECC architecture with CL46 latency and 1.1V operation ensures data integrity and stability for the Supermicro H14DST-F motherboard. The 2Rx8 rank structure matches the board's memory-controller requirements for full-capacity recognition.

Suited for Supermicro H14DST-F upgrades

Ideal for administrators populating every slot on a Supermicro H14DST-F with validated registered ECC modules. Builders needing unbuffered UDIMMs, SODIMMs, or non-ECC memory should look elsewhere, as this kit uses the 288-pin RDIMM form factor required by the target platform.

DDR5-5600 CL46 Registered ECC spec

The decisive specification is the DDR5-5600 (PC5-44800) registered ECC profile with CL46 timing at 1.1V in a 2Rx8 288-pin RDIMM. If your server demands a different speed, voltage, rank, or form factor, this kit will not be compatible.

Kohokohdat

  • 384 GB total capacity lets you fully populate the server for memory-intensive workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the H14DST-F platform
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation matches the board's voltage requirement for stable full-capacity operation
  • Eight 48 GB 2Rx8 modules in a 288-pin RDIMM kit ensure exact-fit compatibility

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard must I already have for this 384GB DDR5-5600 ECC RDIMM kit to be recognised at full capacity?

The kit is validated for the Supermicro H14DST-F motherboard; it uses the 288-pin RDIMM form factor and 2Rx8 organisation that board requires.

Will these 48GB modules run alongside any existing DDR5 RDIMMs I keep in the same H14DST-F system?

Mixing ranks, speeds or voltages can prevent full-speed operation; populate all eight slots with this matched 1.1V CL46 kit for guaranteed stability.

How do I confirm the system is using the full 384GB at DDR5-5600 with ECC active after installation?

Check BIOS memory information for 384GB total, 5600 MT/s data rate, and ECC status enabled; run a memory diagnostic to verify error correction.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.