Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM sticks without heat spreaders, 128GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (2x64GB) ECC RDIMM CL46 1.1V Supermicro H13DSG-OM memory upgrade

SKU CH-N3WN-QTAQ3

128 GB DDR5 5600 ECC RDIMM kit (2×64 GB, CL46, 1.1 V, 2Rx4) validated for Supermicro H13DSG-OM motherboards

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Näytä 30 muuta kokoonpanoa
  • 128 GB capacity in a 2 x 64 GB kit for maximum server density
  • DDR5 5600 speed rated at PC5 44800 for high throughput
  • Registered ECC RDIMM design corrects single-bit errors and supports full population
  • CL46 latency at 1.10 V balances responsiveness with efficiency
  • Verified compatibility with Supermicro H13DSG-OM motherboard for exact-fit upgrades

Exact-match server upgrade

This 128GB kit delivers two 64GB DDR5 5600 RDIMMs built to the precise rank, voltage and timing the Supermicro H13DSG-OM memory controller expects. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors before they reach production workloads.

Thermals and power in normal use

Modules operate at the standard DDR5 1.1V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping power draw predictable when all channels are populated at 5600 MT/s.

What the bundle changes

The two-module kit matches the board's population rules so the full 128GB is recognised immediately at CL46 5600. Lifetime replacement coverage and US-based technical support back the installation, while the exact-fit specification removes the guesswork from qualified-vendor-list checks.

Kohokohdat

  • 128 GB capacity in a 2 x 64 GB kit for maximum server density
  • DDR5 5600 speed rated at PC5 44800 for high throughput
  • Registered ECC RDIMM design corrects single-bit errors and supports full population
  • CL46 latency at 1.10 V balances responsiveness with efficiency
  • Verified compatibility with Supermicro H13DSG-OM motherboard for exact-fit upgrades

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR5 RDIMM kit in the Supermicro H13DSG-OM and what step is often missed?

Power down, open the chassis, and insert each 64 GB module into the slots specified by the motherboard manual, pressing until both ejector clips lock; the step often missed is verifying the exact population order required for 2Rx4 registered DIMMs so the system recognises the full 128 GB at 5600 MT/s.

What maintenance or replacement will the 128 GB DDR5 ECC RDIMM kit need over its service life?

No routine maintenance is required; the modules have no heat spreader and run at 1.1 V, so only a failed DIMM would need replacement, which is covered by the lifetime replacement warranty.

What limit appears first when the 2Rx4 registered DDR5 5600 kit runs sustained workloads on the H13DSG-OM?

The memory controller’s maximum supported capacity and population rules for 2Rx4 registered DIMMs are the first limit; exceeding the approved slot count or total capacity per channel will prevent the kit from running at its rated 5600 MT/s CL46.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.