暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Eight green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5-5600 ECC RDIMM 384GB (8×48GB) CL46 1.1V 2Rx8 Supermicro H14DST-F

SKU CH-MDGF-BTJGR

Eight 48 GB DDR5-5600 RDIMMs deliver 384 GB of registered ECC memory at 1.1 V CL46 for the Supermicro H14DST-F motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

他に 30点の構成を表示
  • 384 GB total capacity lets you fully populate the server for memory-intensive workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the H14DST-F platform
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation matches the board's voltage requirement for stable full-capacity operation
  • Eight 48 GB 2Rx8 modules in a 288-pin RDIMM kit ensure exact-fit compatibility

384GB DDR5-5600 ECC RDIMM Kit

This NEMIX RAM kit delivers 384GB across eight 48GB DDR5-5600 RDIMMs. Registered ECC architecture with CL46 latency and 1.1V operation ensures data integrity and stability for the Supermicro H14DST-F motherboard. The 2Rx8 rank structure matches the board's memory-controller requirements for full-capacity recognition.

Suited for Supermicro H14DST-F upgrades

Ideal for administrators populating every slot on a Supermicro H14DST-F with validated registered ECC modules. Builders needing unbuffered UDIMMs, SODIMMs, or non-ECC memory should look elsewhere, as this kit uses the 288-pin RDIMM form factor required by the target platform.

DDR5-5600 CL46 Registered ECC spec

The decisive specification is the DDR5-5600 (PC5-44800) registered ECC profile with CL46 timing at 1.1V in a 2Rx8 288-pin RDIMM. If your server demands a different speed, voltage, rank, or form factor, this kit will not be compatible.

特長

  • 384 GB total capacity lets you fully populate the server for memory-intensive workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the H14DST-F platform
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation matches the board's voltage requirement for stable full-capacity operation
  • Eight 48 GB 2Rx8 modules in a 288-pin RDIMM kit ensure exact-fit compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard must I already have for this 384GB DDR5-5600 ECC RDIMM kit to be recognised at full capacity?

The kit is validated for the Supermicro H14DST-F motherboard; it uses the 288-pin RDIMM form factor and 2Rx8 organisation that board requires.

Will these 48GB modules run alongside any existing DDR5 RDIMMs I keep in the same H14DST-F system?

Mixing ranks, speeds or voltages can prevent full-speed operation; populate all eight slots with this matched 1.1V CL46 kit for guaranteed stability.

How do I confirm the system is using the full 384GB at DDR5-5600 with ECC active after installation?

Check BIOS memory information for 384GB total, 5600 MT/s data rate, and ECC status enabled; run a memory diagnostic to verify error correction.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。