Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5-5600 ECC RDIMM 384GB (8×48GB) CL46 1.1V 2Rx8 Supermicro H14DST-F

SKU CH-MDGF-BTJGR

Eight 48 GB DDR5-5600 RDIMMs deliver 384 GB of registered ECC memory at 1.1 V CL46 for the Supermicro H14DST-F motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

Zobrazit dalších 30 konfigurací
  • 384 GB total capacity lets you fully populate the server for memory-intensive workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the H14DST-F platform
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation matches the board's voltage requirement for stable full-capacity operation
  • Eight 48 GB 2Rx8 modules in a 288-pin RDIMM kit ensure exact-fit compatibility

384GB DDR5-5600 ECC RDIMM Kit

This NEMIX RAM kit delivers 384GB across eight 48GB DDR5-5600 RDIMMs. Registered ECC architecture with CL46 latency and 1.1V operation ensures data integrity and stability for the Supermicro H14DST-F motherboard. The 2Rx8 rank structure matches the board's memory-controller requirements for full-capacity recognition.

Suited for Supermicro H14DST-F upgrades

Ideal for administrators populating every slot on a Supermicro H14DST-F with validated registered ECC modules. Builders needing unbuffered UDIMMs, SODIMMs, or non-ECC memory should look elsewhere, as this kit uses the 288-pin RDIMM form factor required by the target platform.

DDR5-5600 CL46 Registered ECC spec

The decisive specification is the DDR5-5600 (PC5-44800) registered ECC profile with CL46 timing at 1.1V in a 2Rx8 288-pin RDIMM. If your server demands a different speed, voltage, rank, or form factor, this kit will not be compatible.

Přednosti

  • 384 GB total capacity lets you fully populate the server for memory-intensive workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput for the H14DST-F platform
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • 1 V operation matches the board's voltage requirement for stable full-capacity operation
  • Eight 48 GB 2Rx8 modules in a 288-pin RDIMM kit ensure exact-fit compatibility

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard must I already have for this 384GB DDR5-5600 ECC RDIMM kit to be recognised at full capacity?

The kit is validated for the Supermicro H14DST-F motherboard; it uses the 288-pin RDIMM form factor and 2Rx8 organisation that board requires.

Will these 48GB modules run alongside any existing DDR5 RDIMMs I keep in the same H14DST-F system?

Mixing ranks, speeds or voltages can prevent full-speed operation; populate all eight slots with this matched 1.1V CL46 kit for guaranteed stability.

How do I confirm the system is using the full 384GB at DDR5-5600 with ECC active after installation?

Check BIOS memory information for 384GB total, 5600 MT/s data rate, and ECC status enabled; run a memory diagnostic to verify error correction.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.