Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 512GB (4×128GB) DDR5 5600 CL46 1.1V ECC RDIMM for GIGABYTE MZ73-LM2

SKU CH-F9RK-84XFZ

512 GB kit of four 128 GB DDR5 5600 registered ECC RDIMMs validated for the GIGABYTE MZ73-LM2 motherboard

  • Capacity512GB (4 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity from four 128 GB modules for maximum memory density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput server workloads
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • CL46 latency at 1.1 V delivers rated performance within standard power envelope
  • Verified compatibility with the GIGABYTE MZ73-LM2 motherboard using 288-pin RDIMM form factor

Exact-match kit

This 512GB kit supplies four 128GB DDR5 RDIMMs rated at 5600 MT/s with CL46 timing and 1.10V operation. It is built for the GIGABYTE MZ73-LM2 motherboard and uses registered ECC modules that the board's memory controller expects. The 2Rx4 organisation and 288-pin form factor match the platform's population rules exactly.

Build fit

Registered buffering reduces electrical load on the memory controller so all four slots can run fully populated at the rated speed. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. The kit frees you from mixing modules or guessing population order because every DIMM is spec-matched to the motherboard.

Thermals and power

Modules operate at the standard DDR5 voltage of 1.10V and have no heat spreader, relying on chassis airflow for cooling. Registered architecture keeps per-pin current low, helping maintain stable thermals under sustained load. Power draw scales with the 5600 MT/s data rate and the four-module population, so ensure your server chassis provides adequate airflow across the DIMM slots.

Kohokohdat

  • 512 GB total capacity from four 128 GB modules for maximum memory density
  • DDR5 5600 speed rated at PC5-44800 for high-throughput server workloads
  • Registered ECC architecture with 2Rx4 organisation offloads the controller and corrects single-bit errors
  • CL46 latency at 1.1 V delivers rated performance within standard power envelope
  • Verified compatibility with the GIGABYTE MZ73-LM2 motherboard using 288-pin RDIMM form factor

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K4
Capacity512GB (4 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 4X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How does the CL46 latency affect performance when all four 128GB modules run continuously?

CL46 is the rated CAS latency at DDR5 5600 speed. The registered ECC design keeps every slot stable at full capacity during sustained workloads.

What are the thermal and power characteristics of this 512GB kit under all-day load?

Each module operates at 1.1V without a heat spreader. Registered buffering reduces electrical load on the memory controller during continuous operation.

Which motherboard and CPU configuration is required for this 288-pin RDIMM kit to function?

The kit is validated for the GIGABYTE MZ73-LM2 motherboard. That platform must support DDR5 RDIMM, ECC, and 2Rx4 population rules.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.