Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules without heat spreaders in a row

NEMIX RAM

NEMIX RAM 512GB (8x64GB) DDR5 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-Q5DF-1YTAV

Eight 64 GB DDR5 registered ECC RDIMMs running at 6400 MHz CL52 1.1 V for the GIGABYTE MZ33-CP1 motherboard

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 512GB 8X64GB

Näytä 24 muuta kokoonpanoa
  • 512 GB total capacity from eight 64 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits GIGABYTE MZ33-CP1 motherboard

Exact-match DDR5 kit for GIGABYTE MZ33-CP1

This 512 GB kit delivers eight 64 GB DDR5 RDIMMs tuned for the GIGABYTE MZ33-CP1 motherboard. Registered ECC modules operate at 1.1 V with CL52 timing so the board recognises full capacity at rated speed. The 2Rx4 organisation and 288-pin form factor match the platform's memory-population rules precisely.

Registered ECC with 2Rx4 rank

Registered buffering offloads the memory controller while ECC corrects single-bit errors on the fly, preventing silent data corruption during sustained workloads. The 2Rx4 dual-rank layout allows all eight slots to run fully populated at DDR5-6400 without signal degradation. Samsung, Micron or Hynix die provide enterprise-grade stability for production servers.

Eight-slot population frees expansion space

Populating every DIMM slot with 64 GB modules reaches the board's maximum supported capacity in a single kit, leaving no empty sockets for future upgrades. No heat spreaders are fitted, so clearance for tall CPU coolers or dense chassis airflow is preserved. Verify the motherboard manual for approved population order before installation.

Kohokohdat

  • 512 GB total capacity from eight 64 GB modules
  • DDR5 6400 speed with CL52 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits GIGABYTE MZ33-CP1 motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the DDR5 6400 speed rating deliver once the modules are installed in a GIGABYTE MZ33-CP1?

The kit runs at 6400 MT/s with CL52 latency at 1.1 V, providing the exact data rate and timing the motherboard's memory controller expects for full-capacity operation across all populated slots.

How does the DDR5 RDIMM interface and ECC registration affect practical performance limits?

Registered buffering reduces electrical load on the controller so all eight slots can run at the rated 6400 MT/s, while on-die ECC corrects single-bit errors in real time to prevent silent data corruption.

What physical clearance and slot requirements must the chassis and motherboard meet for these 288-pin RDIMMs?

Each module uses the standard 288-pin DDR5 RDIMM form factor without a heat spreader, so they fit any motherboard slot wired for registered DDR5 provided the chassis allows full-height DIMM insertion.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.