Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 1.1V 288-pin UDIMM Supermicro X14SAE memory upgrade

SKU CH-FTPD-CCRKJ

A 64 GB DDR5 kit with two 32 GB UDIMMs running at 5600 MHz CL46, validated for the Supermicro X14SAE motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • 64 GB capacity from a matched 2×32 GB kit for full dual-channel bandwidth
  • DDR5 5600 speed with CL46 latency runs at the board's rated frequency
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 2Rx8 Non-ECC UDIMM form factor fits the Supermicro X14SAE population rules
  • Built with major OEM Samsung, Micron or Hynix chips and stability tested

System-Specific DDR5 Kit for Supermicro X14SAE

This 64 GB kit contains two 32 GB DDR5 5600 modules built to the exact rank, voltage and timing the Supermicro X14SAE memory controller expects. It is intended for owners of that motherboard who need the full 64 GB capacity recognised at rated speed without manual tuning.

288-Pin UDIMM Form Factor and Population Rules

The modules use the 288-pin unbuffered UDIMM form factor required by the X14SAE, not ECC server DIMMs or SODIMMs. Installation must follow the board's documented DIMM population order so the memory controller initialises both ranks at 1.10 V and CL46.

Major OEM Chips Tested at Rated Specs

Each module is assembled with Samsung, Micron or Hynix components and validated for stability at DDR5 5600, PC5-44800, 2Rx8 organisation and the specified voltage. The kit ships as a matched pair with no heat spreaders, ready for direct installation.

Kohokohdat

  • 64 GB capacity from a matched 2×32 GB kit for full dual-channel bandwidth
  • DDR5 5600 speed with CL46 latency runs at the board's rated frequency
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 2Rx8 Non-ECC UDIMM form factor fits the Supermicro X14SAE population rules
  • Built with major OEM Samsung, Micron or Hynix chips and stability tested

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 2Rx8 dual-rank design limit how many of these 32 GB modules I can install on the Supermicro X14SAE?

The kit is built to the board's exact population rules, so both 32 GB modules are recognised at full 64 GB capacity and run at the rated DDR5 5600 speed.

How hot or loud do these bare modules get when the system runs all day?

Without a heat spreader the chips rely on case airflow; at the standard 1.10 V DDR5 voltage they stay cool and silent under continuous load.

What must my motherboard already provide for this kit to work?

A Supermicro X14SAE with DDR5 UDIMM slots that accept non-ECC unbuffered 288-pin memory at 1.10 V.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.