Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green circuit boards with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 1.1V 2Rx8 UDIMM Supermicro X14SAE memory upgrade

SKU CH-A5YW-K5C91

64GB kit of two 32GB DDR5-4800 CL40 unbuffered UDIMMs validated for the Supermicro X14SAE motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB total capacity from two 32 GB modules for high-density workloads
  • DDR5 4800 MT/s speed with CL40 latency for responsive data access
  • 10 V operating voltage reduces power draw and heat output
  • 2Rx8 dual-rank organisation maximises memory controller efficiency
  • 288-pin UDIMM form factor validated for Supermicro X14SAE motherboard

64 GB DDR5 kit for Supermicro X14SAE

This 64 GB kit delivers two 32 GB DDR5 4800 modules built to the exact rank, voltage and timing the Supermicro X14SAE memory controller expects. It installs as a matched pair so the board recognises the full capacity at its rated speed without manual tuning. Builders using other motherboards or needing ECC registered DIMMs should look elsewhere.

Thermals noise and power draw

Operating at 1.10 V the modules run at standard DDR5 voltage without a heat spreader, relying on case airflow for cooling. The low voltage keeps power draw modest during typical workloads and the unbuffered design adds no active components that could generate noise. Systems with restricted airflow may see higher temperatures than those with direct DIMM ventilation.

What the bundle changes

The package contains only the two UDIMMs; no extra cables, software or configuration tools are included. Compatibility is verified for the X14SAE so the kit works immediately after seating the modules in the correct slots. Users must still consult their motherboard manual for approved population order and maximum supported capacity before installation.

Kohokohdat

  • 64 GB total capacity from two 32 GB modules for high-density workloads
  • DDR5 4800 MT/s speed with CL40 latency for responsive data access
  • 10 V operating voltage reduces power draw and heat output
  • 2Rx8 dual-rank organisation maximises memory controller efficiency
  • 288-pin UDIMM form factor validated for Supermicro X14SAE motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR5 UDIMM kit in the Supermicro X14SAE and which slot order avoids the common population mistake?

Power off, open the chassis, align each 288-pin UDIMM with the keyed slot, press firmly until the retention clips click, then follow the motherboard manual's exact DIMM population sequence — usually filling the first channel pair before the second — so the 2Rx8 modules initialise at DDR5-4800 CL40 1.10V.

What maintenance or replacement will the NEMIX RAM DDR5 kit need over its service life?

The modules have no heat spreader and no moving parts, so routine care is limited to keeping the system's airflow clear of dust; if a module ever fails, the lifetime replacement warranty covers a direct swap of the 2x32GB kit.

What limit appears first when the 64GB DDR5-4800 CL40 kit runs sustained workloads on the X14SAE?

The memory controller locks the kit to its rated DDR5-4800 1.10V CL40 2Rx8 timing, so sustained throughput tops out at the PC5-38400 bandwidth ceiling rather than thermal or voltage headroom.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.