我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 4800 CL40 1.1V 2Rx8 UDIMM Supermicro X14SAE memory upgrade

SKU CH-A5YW-K5C91

64GB kit of two 32GB DDR5-4800 CL40 unbuffered UDIMMs validated for the Supermicro X14SAE motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo
  • 64 GB total capacity from two 32 GB modules for high-density workloads
  • DDR5 4800 MT/s speed with CL40 latency for responsive data access
  • 10 V operating voltage reduces power draw and heat output
  • 2Rx8 dual-rank organisation maximises memory controller efficiency
  • 288-pin UDIMM form factor validated for Supermicro X14SAE motherboard

64 GB DDR5 kit for Supermicro X14SAE

This 64 GB kit delivers two 32 GB DDR5 4800 modules built to the exact rank, voltage and timing the Supermicro X14SAE memory controller expects. It installs as a matched pair so the board recognises the full capacity at its rated speed without manual tuning. Builders using other motherboards or needing ECC registered DIMMs should look elsewhere.

Thermals noise and power draw

Operating at 1.10 V the modules run at standard DDR5 voltage without a heat spreader, relying on case airflow for cooling. The low voltage keeps power draw modest during typical workloads and the unbuffered design adds no active components that could generate noise. Systems with restricted airflow may see higher temperatures than those with direct DIMM ventilation.

What the bundle changes

The package contains only the two UDIMMs; no extra cables, software or configuration tools are included. Compatibility is verified for the X14SAE so the kit works immediately after seating the modules in the correct slots. Users must still consult their motherboard manual for approved population order and maximum supported capacity before installation.

商品特色

  • 64 GB total capacity from two 32 GB modules for high-density workloads
  • DDR5 4800 MT/s speed with CL40 latency for responsive data access
  • 10 V operating voltage reduces power draw and heat output
  • 2Rx8 dual-rank organisation maximises memory controller efficiency
  • 288-pin UDIMM form factor validated for Supermicro X14SAE motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I install the 288-pin DDR5 UDIMM kit in the Supermicro X14SAE and which slot order avoids the common population mistake?

Power off, open the chassis, align each 288-pin UDIMM with the keyed slot, press firmly until the retention clips click, then follow the motherboard manual's exact DIMM population sequence — usually filling the first channel pair before the second — so the 2Rx8 modules initialise at DDR5-4800 CL40 1.10V.

What maintenance or replacement will the NEMIX RAM DDR5 kit need over its service life?

The modules have no heat spreader and no moving parts, so routine care is limited to keeping the system's airflow clear of dust; if a module ever fails, the lifetime replacement warranty covers a direct swap of the 2x32GB kit.

What limit appears first when the 64GB DDR5-4800 CL40 kit runs sustained workloads on the X14SAE?

The memory controller locks the kit to its rated DDR5-4800 1.10V CL40 2Rx8 timing, so sustained throughput tops out at the PC5-38400 bandwidth ceiling rather than thermal or voltage headroom.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。