Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green DDR5 RDIMM circuit board with gold edge contacts and black memory chips

NEMIX RAM

NEMIX RAM 96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSF memory upgrade

SKU CH-21J5-MPJQ9

96GB DDR5 4800 registered ECC RDIMM with CL40 timing and 1.1V operation, built for the Supermicro H13SSF motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 96GB

Näytä 30 muuta kokoonpanoa
  • 96GB capacity fills a single DIMM slot for maximum density
  • DDR5 4800 speed with CL40 latency matches server controller timing
  • 2Rx4 Registered ECC architecture corrects single-bit errors on the fly
  • 1V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Supermicro H13SSF motherboard exactly

96GB DDR5 RDIMM for Supermicro H13SSF

This 96GB DDR5 4800 Registered ECC module is built as an exact-match upgrade for the Supermicro H13SSF motherboard. It uses the 2Rx4 rank organisation and 1.10V voltage that the platform's memory controller expects. The 288-pin RDIMM form factor fits the server board's DIMM slots without adapters.

Registered ECC limits and population rules

Registered buffering offloads the memory controller so every populated slot can run at the rated DDR5 4800 speed, while on-die ECC corrects single-bit errors before they reach the operating system. The motherboard manual defines the approved DIMM population order and maximum supported capacity per channel; exceeding those limits will prevent the system from posting.

Capacity headroom for dense workloads

A single 96GB module provides substantial memory headroom for virtualisation hosts, database buffers and large-scale analytics jobs that benefit from keeping hot data in RAM. Workloads whose working set grows beyond the installed capacity will spill to slower storage tiers and see increased latency. Buyers needing more total memory must verify the board's maximum supported capacity and slot count before adding additional modules.

Kohokohdat

  • 96GB capacity fills a single DIMM slot for maximum density
  • DDR5 4800 speed with CL40 latency matches server controller timing
  • 2Rx4 Registered ECC architecture corrects single-bit errors on the fly
  • 1V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Supermicro H13SSF motherboard exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 96GB 2Rx4 kit or a different capacity for my Supermicro H13SSF?

The 96GB kit uses two 48GB 2Rx4 Registered ECC modules at DDR5-4800 CL40 1.1V, matching the board's required rank, voltage, and timing so the memory controller recognises full capacity at rated speed.

What does the DDR5-4800 CL40 rating deliver once installed in the H13SSF?

The modules run at 4800 MT/s with 40-cycle CAS latency at 1.1V, giving the bandwidth and latency the server's memory controller expects for stable full-population operation.

How does the 288-pin RDIMM interface and ECC registration affect real-world limits?

The 288-pin Registered DIMM form factor with on-board ECC lets every slot run fully populated at 96GB total while correcting single-bit errors, preventing silent data corruption under sustained server loads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.