Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 96GB (6×16GB) DDR5-5600 CL46 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-PRTP-553D7

Six 16 GB DDR5-5600 registered ECC modules deliver 96 GB at 1.1 V with CL46 timing for the Supermicro H14DSG-OM motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Näytä 30 muuta kokoonpanoa
  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5-5600 CL46 timing delivers rated throughput for the Supermicro H14DSG-OM platform
  • ECC and registered architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation matches the board's voltage specification for stable full-population runs
  • 288-pin RDIMM form factor fits the exact slots required by the motherboard

Server-grade DDR5 ECC RDIMM kit

This 96 GB kit contains six 16 GB DDR5-5600 registered ECC modules built to the exact timing and voltage the Supermicro H14DSG-OM memory controller expects. Each DIMM is a 288-pin RDIMM rated at CL46 and 1.1 V with a 1Rx8 organisation for full-speed operation across all populated slots.

Replaces mismatched or slower memory

When existing modules are mixed speeds, unbuffered, or non-ECC, the server often downclocks or limits capacity; this kit eliminates those compromises by matching the board’s qualified vendor list. The jump is worth it when you need the full 96 GB recognised at the rated 5600 MT/s without manual BIOS tuning.

Suits administrators populating a Supermicro

It fits builders who require registered ECC stability for virtualisation, database, or compute workloads on this specific platform. Buyers needing UDIMM or SODIMM form factors, non-ECC operation, or capacities beyond this 6-module kit should look at other memory lines.

Kohokohdat

  • 96 GB total capacity from six 16 GB modules for high-density server workloads
  • DDR5-5600 CL46 timing delivers rated throughput for the Supermicro H14DSG-OM platform
  • ECC and registered architecture corrects single-bit errors and offloads the memory controller
  • 10 V operation matches the board's voltage specification for stable full-population runs
  • 288-pin RDIMM form factor fits the exact slots required by the motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will these 288-pin DDR5 RDIMMs fit the Supermicro H14DSG-OM motherboard?

Yes, the kit is verified for the H14DSG-OM. The board requires 288-pin Registered DDR5 DIMMs, not UDIMM or SODIMM, and this 6×16 GB kit matches that form factor.

What is the correct installation order for all six modules on the H14DSG-OM?

Consult the motherboard manual for the approved DIMM population sequence; servers often require specific slots to be filled first for full 96 GB recognition and DDR5-5600 operation.

Do these registered ECC modules need active cooling or periodic replacement?

No heat spreader is included, so rely on chassis airflow. Registered ECC DDR5 runs at 1.1 V with on-die ECC; modules are not a scheduled replacement part under normal server operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.