Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green bare circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM memory upgrade for Supermicro X14SDV-42C-SP3F

SKU CH-1H30-J58WC

96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM validated for Supermicro X14SDV-42C-SP3F motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96 GB DDR5-6400 CL52 ECC RDIMM delivers full rated capacity and speed on Supermicro X14SDV-42C-SP3F
  • Registered 2Rx4 architecture offloads the memory controller for stable fully populated operation at 1.1 V
  • ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
  • 288-pin RDIMM form factor matches the board's required DIMM type and population rules
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

Exact-Match Server Memory Upgrade

This 96GB DDR5-6400 Registered ECC RDIMM is built for the Supermicro X14SDV-42C-SP3F motherboard. It delivers the precise 2Rx4 rank, 1.1V voltage and CL52 timing the memory controller expects for full-capacity recognition at rated speed.

Who This Suits and Who Should Look Elsewhere

Suits administrators upgrading that specific Supermicro platform with validated RDIMM population rules. Not for systems needing unbuffered UDIMMs, SODIMM form factors, non-ECC memory, or different DDR generations.

DDR5 6400 CL52 2Rx4 1.1V Specification

The CL52 latency at 6400 MT/s with 2Rx4 organization and 1.1V operation determines whether this module matches your board's qualified vendor list. Verify your manual for supported capacities and slot population order before purchase.

Kohokohdat

  • 96 GB DDR5-6400 CL52 ECC RDIMM delivers full rated capacity and speed on Supermicro X14SDV-42C-SP3F
  • Registered 2Rx4 architecture offloads the memory controller for stable fully populated operation at 1.1 V
  • ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots
  • 288-pin RDIMM form factor matches the board's required DIMM type and population rules
  • Built with major OEM Samsung Micron Hynix chips for enterprise-grade reliability

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the 96GB DDR5 6400 CL52 ECC RDIMM is running at its rated speed after installation?

Enter the system BIOS or UEFI on the Supermicro X14SDV-42C-SP3F and verify the memory frequency shows 6400 MT/s, the voltage reads 1.1V, and the CAS latency reports CL52. The registered ECC design ensures the memory controller recognises the 2Rx4 modules at full capacity when populated correctly.

What comes in the package and is anything else required to install it?

The box contains the 96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V CL52 288-pin ECC RDIMM kit. No additional parts are needed for installation on the compatible Supermicro motherboard; the modules slot directly into the 288-pin RDIMM sockets.

Which capacity or version should I choose for the Supermicro X14SDV-42C-SP3F?

This specific part number MR51200-9624K1 delivers 96GB as a single kit of DDR5 6400 CL52 2Rx4 registered ECC RDIMMs at 1.1V. Choose this exact configuration when your server requires that capacity, rank, voltage and timing combination for full population on the X14SDV-42C-SP3F.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.