Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green bare circuit board with gold edge contacts and black memory chips 96GB DDR5 6400 RDIMM

NEMIX RAM

NEMIX RAM 96GB DDR5 6400MHz CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro X14SDI-36C-SP3F memory upgrade

SKU CH-SKD8-F33HH

96 GB DDR5 6400 MHz CL52 2Rx4 1.1 V ECC Registered 288-pin RDIMM validated for the Supermicro X14SDI-36C-SP3F motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96 GB capacity lets you fully populate server slots for maximum throughput
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth without down-clocking
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operation matches the platform's voltage spec for stable, low-power performance
  • Verified fit for Supermicro X14SDI-36C-SP3F with 288-pin RDIMM form factor

Exact-match server upgrade

This 96GB DDR5 RDIMM is built for the Supermicro X14SDI-36C-SP3F motherboard. It delivers registered ECC memory that the board's controller recognises at full capacity without manual tuning. System administrators handling virtualisation or database workloads get a drop-in module that meets the platform's strict population rules.

Registered ECC with 2Rx4 organisation

The single specification that decides fitment is the 2Rx4 registered ECC layout at 1.1V and CL52. This rank structure and voltage match the memory controller's expectations so every populated slot runs at the rated 6400MT/s. A UDIMM or different rank configuration would not initialise on this platform.

Kit contains only the memory module

The package supplies the 96GB DDR5 6400 RDIMM itself with no heat spreader, cables, software or documentation beyond the standard label. Installers must follow the motherboard manual for approved slot population order and BIOS settings. No additional accessories are included to alter the installation process.

Kohokohdat

  • 96 GB capacity lets you fully populate server slots for maximum throughput
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth without down-clocking
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
  • 1 V operation matches the platform's voltage spec for stable, low-power performance
  • Verified fit for Supermicro X14SDI-36C-SP3F with 288-pin RDIMM form factor

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the DDR5 6400 speed mean for actual throughput on this Supermicro board?

The module is rated for 6400 MT/s, so the memory controller on the Supermicro X14SDI-36C-SP3F will transfer data at that rate when the DIMM is installed in a supported slot.

How does the PC5-51200 designation relate to the DDR5 6400 rating on this RDIMM?

PC5-51200 is the JEDEC module name that pairs with DDR5 6400; both labels describe the same 6400 MT/s data rate.

Will the 288-pin Registered form factor fit the memory slots on my X14SDI-36C-SP3F motherboard?

Yes, this 288-pin RDIMM matches the registered DIMM slots required by the Supermicro X14SDI-36C-SP3F.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.