Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Twelve green DDR5 RDIMM modules without heat spreaders in a row

NEMIX RAM

NEMIX RAM DDR5 1.1TB (12x96GB) 4800MHz CL40 ECC RDIMM Supermicro H13SSF memory upgrade

SKU CH-KZWE-635T6

A 1.1 TB DDR5 ECC registered RDIMM kit of twelve 96 GB modules at 4800 MHz CL40, validated for the Supermicro H13SSF motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Näytä 30 muuta kokoonpanoa
  • 1TB kit of twelve 96GB DDR5 modules installs at full rated capacity
  • DDR5-4800 CL40 2Rx4 registered ECC matches the server memory controller exactly
  • 1V 288-pin RDIMM form factor fits the Supermicro H13SSF motherboard precisely
  • Registered buffer plus ECC prevents silent data corruption across every populated slot
  • Lifetime replacement warranty with free US-based technical support included

Supermicro H13SSF DDR5 upgrade

This 1.1TB kit is built for the Supermicro H13SSF motherboard. It contains twelve 96GB DDR5 RDIMM modules that the board recognises at full capacity and rated speed. System administrators expanding memory in this specific platform use it to reach the board's supported limit. Builders working with any other motherboard or form factor cannot use these modules.

Registered ECC RDIMM at 4800MHz

The single specification that decides fitment is the 288-pin registered ECC RDIMM form factor running at DDR5-4800 with CL40 latency and 1.10V operation. The Supermicro H13SSF requires this exact registered architecture; unbuffered UDIMMs or SODIMMs will not post. Population rules in the board manual must be followed for all twelve slots to train correctly.

1.1TB capacity for dense workloads

Twelve ranks of 2Rx4 organisation give 1.1TB of addressable memory, enough for large in-memory databases, virtualisation hosts and HPC datasets. Full-speed operation holds across all populated channels when the board's memory controller is configured per the vendor guide. Workloads that exceed this capacity or need faster than 4800MT/s transfer rates will require a different platform.

Kohokohdat

  • 1TB kit of twelve 96GB DDR5 modules installs at full rated capacity
  • DDR5-4800 CL40 2Rx4 registered ECC matches the server memory controller exactly
  • 1V 288-pin RDIMM form factor fits the Supermicro H13SSF motherboard precisely
  • Registered buffer plus ECC prevents silent data corruption across every populated slot
  • Lifetime replacement warranty with free US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 4800 MHz rating mean once the modules are installed in a Supermicro H13SSF?

The server's memory controller will recognise the kit at its rated DDR5-4800 speed and run all twelve 96 GB modules at that frequency without down-clocking.

How does the 288-pin RDIMM interface affect usable bandwidth on this board?

The registered 288-pin RDIMM form factor is exactly what the H13SSF requires; it allows every slot to be populated at full 4800 MT/s throughput.

What physical space and slot arrangement does the 12-module kit need?

Twelve 288-pin RDIMM slots must be free on the H13SSF, and the modules must follow the board's prescribed population order.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.