Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 192GB 2x96GB 6400MHz CL52 1.1V ECC RDIMM 2Rx4 GIGABYTE MS04-CE0 memory upgrade

SKU CH-KB03-B5N0Y

192 GB DDR5 6400 MHz registered ECC RDIMM kit of two 96 GB modules at 1.1 V CL52, validated for the GIGABYTE MS04-CE0 motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Näytä 18 muuta kokoonpanoa
  • 192 GB total capacity for large-scale workloads using two 96 GB modules
  • DDR5 6400 MT/s rated speed with CL52 latency for high-throughput server tasks
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors automatically
  • 1 V operating voltage matches the motherboard specification for stable full-population operation
  • Verified 288-pin fitment for GIGABYTE MS04-CE0 motherboard memory population rules

Exact-match server upgrade

This NEMIX RAM kit provides 192GB of DDR5 memory in two 96GB modules built for the GIGABYTE MS04-CE0 motherboard. Registered ECC RDIMMs deliver the error correction and signal buffering required by enterprise platforms. The kit installs as a matched pair to satisfy the board's population rules.

Registered ECC RDIMM form factor

The modules use the 288-pin RDIMM interface with 2Rx4 organisation so the memory controller sees the correct electrical load. Buffered architecture allows full-capacity operation across every populated slot while ECC corrects single-bit errors automatically. A UDIMM or SODIMM will not function in this system.

Low-voltage DDR5 operation

Each module runs at 1.1V while delivering DDR5-6400 speed with CL52 latency. The reduced voltage lowers power draw per gigabyte compared with earlier server memory. Passive components rely on chassis airflow for cooling; no integrated heat spreader is present.

Kohokohdat

  • 192 GB total capacity for large-scale workloads using two 96 GB modules
  • DDR5 6400 MT/s rated speed with CL52 latency for high-throughput server tasks
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors automatically
  • 1 V operating voltage matches the motherboard specification for stable full-population operation
  • Verified 288-pin fitment for GIGABYTE MS04-CE0 motherboard memory population rules

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What does the 6400MHz speed mean once installed in a GIGABYTE MS04-CE0 server?

The kit runs at DDR5-6400 (PC5-51200) data rate with CL52 latency at 1.1V, delivering the full rated throughput the motherboard's memory controller expects when both 96GB modules are populated.

How does the 288-pin RDIMM interface and ECC registration affect real-world operation?

The 288-pin Registered DIMM form factor with on-die ECC offloads the memory controller, allowing both slots to run fully populated at 192GB while correcting single-bit errors to prevent silent data corruption.

What physical clearance and slot requirements does this 2Rx4 kit need?

Each 288-pin RDIMM module has no heat spreader, so it fits standard server DIMM slots; the motherboard must support 2Rx4 registered population rules for the 192GB capacity to be recognised.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.