Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (4x32GB) ECC RDIMM CL46 1.1V Supermicro H13SST-G memory upgrade

SKU CH-CG22-0RWZR

A 128GB DDR5 5600 kit of four 32GB registered ECC RDIMMs built for the Supermicro H13SST-G motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Näytä 24 muuta kokoonpanoa
  • 128 GB total capacity from a four-module 32 GB kit
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the server memory controller specification
  • Verified fitment for Supermicro H13SST-G motherboard

Exact-match DDR5 ECC RDIMM kit

This 128GB kit contains four 32GB DDR5-5600 registered ECC modules built to the precise 2Rx8 rank, 1.10V voltage and CL46 timing the Supermicro H13SST-G memory controller expects. It installs as a matched set so the server recognises the full capacity at rated speed without manual tuning.

Thermals and power in normal use

Operating at the standard 1.10V DDR5 voltage, the modules draw minimal power and run without a heat spreader, relying on the server chassis airflow. Registered buffering reduces electrical load on the memory controller, keeping temperatures stable even when all four slots are populated under sustained workloads.

What the kit changes for your server

The registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production. Buyers needing unbuffered UDIMMs, SODIMM form factors or non-ECC memory for workstation boards cannot use this kit.

Kohokohdat

  • 128 GB total capacity from a four-module 32 GB kit
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the server memory controller specification
  • Verified fitment for Supermicro H13SST-G motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H13SST-G, and which slot order do people often get wrong?

Power down the server, open the chassis, and insert each 32 GB module into the DIMM slots following the population sequence shown in the Supermicro H13SST-G manual; the common mistake is filling slots out of order, which prevents the 128 GB kit from being recognised at DDR5-5600.

What maintenance or replacement will the 2Rx8 registered ECC RDIMMs need over time?

The modules have no moving parts or heat spreaders, so no routine maintenance is required; if a single-bit error becomes uncorrectable, ECC will log the event and the affected 32 GB DIMM should be replaced under the lifetime replacement coverage.

What limit appears first when the 1.1 V CL46 kit runs sustained workloads on the H13SST-G?

The registered buffer and 2Rx8 organisation keep electrical loading within spec, so the first ceiling you hit is the DDR5-5600 data rate — the memory controller will not push beyond 5600 MT/s regardless of cooling or voltage headroom.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.