Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (4x32GB) ECC RDIMM CL46 1.1V Supermicro H13SST-G memory upgrade

SKU CH-CG22-0RWZR

A 128GB DDR5 5600 kit of four 32GB registered ECC RDIMMs built for the Supermicro H13SST-G motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Voir les 24 autres configurations
  • 128 GB total capacity from a four-module 32 GB kit
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the server memory controller specification
  • Verified fitment for Supermicro H13SST-G motherboard

Exact-match DDR5 ECC RDIMM kit

This 128GB kit contains four 32GB DDR5-5600 registered ECC modules built to the precise 2Rx8 rank, 1.10V voltage and CL46 timing the Supermicro H13SST-G memory controller expects. It installs as a matched set so the server recognises the full capacity at rated speed without manual tuning.

Thermals and power in normal use

Operating at the standard 1.10V DDR5 voltage, the modules draw minimal power and run without a heat spreader, relying on the server chassis airflow. Registered buffering reduces electrical load on the memory controller, keeping temperatures stable even when all four slots are populated under sustained workloads.

What the kit changes for your server

The registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production. Buyers needing unbuffered UDIMMs, SODIMM form factors or non-ECC memory for workstation boards cannot use this kit.

Points forts

  • 128 GB total capacity from a four-module 32 GB kit
  • DDR5 5600 speed with CL46 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the server memory controller specification
  • Verified fitment for Supermicro H13SST-G motherboard

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H13SST-G, and which slot order do people often get wrong?

Power down the server, open the chassis, and insert each 32 GB module into the DIMM slots following the population sequence shown in the Supermicro H13SST-G manual; the common mistake is filling slots out of order, which prevents the 128 GB kit from being recognised at DDR5-5600.

What maintenance or replacement will the 2Rx8 registered ECC RDIMMs need over time?

The modules have no moving parts or heat spreaders, so no routine maintenance is required; if a single-bit error becomes uncorrectable, ECC will log the event and the affected 32 GB DIMM should be replaced under the lifetime replacement coverage.

What limit appears first when the 1.1 V CL46 kit runs sustained workloads on the H13SST-G?

The registered buffer and 2Rx8 organisation keep electrical loading within spec, so the first ceiling you hit is the DDR5-5600 data rate — the memory controller will not push beyond 5600 MT/s regardless of cooling or voltage headroom.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.