Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules, black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 32GB (2×16GB) CL46 1.1V 288-pin Supermicro H13SVW-NT

SKU CH-KEBC-A7QG3

32 GB registered ECC DDR5 kit with two 16 GB modules at 5600 MHz, CL46 and 1.1 V for Supermicro H13SVW-NT motherboards

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Näytä 12 muuta kokoonpanoa

Speed 5600MHz

  • 32 GB total capacity lets your Supermicro H13SVW-NT run fully populated
  • DDR5-5600 CL46 timing matches the board's rated speed for stable operation
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage meets the platform's power specification exactly
  • 288-pin 1Rx8 modules align with the motherboard's population rules

Exact-match DDR5 upgrade for Supermicro H13SVW-NT

This 32GB kit (2×16GB) delivers DDR5 5600 speed with CL46 latency at 1.1V. The 288-pin registered ECC RDIMM format matches the memory controller’s expectations so the board recognises full capacity and rated speed without manual tuning.

1Rx8 registered modules free controller bandwidth

Registered architecture buffers each command so every slot can run fully populated at 5600 MT/s. The 288-pin RDIMM form factor fits the H13SVW-NT’s DIMM slots; UDIMM or SODIMM alternatives will not seat. Consult the motherboard manual for approved population order before installation.

Sustained enterprise stability under continuous load

ECC corrects single-bit errors on the fly to prevent silent data corruption during long-running workloads. Registered buffering keeps signal integrity consistent across all populated channels. Major OEM DRAM from Samsung, Micron or Hynix maintains rated timings without throttling during extended operation.

Kohokohdat

  • 32 GB total capacity lets your Supermicro H13SVW-NT run fully populated
  • DDR5-5600 CL46 timing matches the board's rated speed for stable operation
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors
  • 1 V operating voltage meets the platform's power specification exactly
  • 288-pin 1Rx8 modules align with the motherboard's population rules

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is the sustained memory bandwidth ceiling of this DDR5 5600 kit when fully populated?

The kit operates at DDR5 5600 (PC5-44800) with CL46 latency, delivering 44800 MT/s per module. Registered buffering lets all slots run at rated speed without downclocking.

What thermal or acoustic impact should I expect when the kit runs continuously in a populated Supermicro H13SVW-NT chassis?

Modules have no heat spreader and draw 1.10V at DDR5 5600. Registered design reduces electrical load on the memory controller, so system fan curves stay unchanged under full load.

What motherboard slot type and population rules must my Supermicro H13SVW-NT already have for this kit to work?

The board needs 288-pin DDR5 RDIMM slots. Install the 2×16GB 1Rx8 modules in the order the manual specifies for dual-channel operation at full 32GB capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.