Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules in a row, no heat spreaders, gold edge connectors visible

NEMIX RAM

NEMIX RAM DDR5 6400 CL52 1.1V 1Rx8 ECC Registered RDIMM 128GB 8x16GB memory upgrade for GIGABYTE MS34-CP0

SKU CH-5H0W-JGZ0V

A 128 GB DDR5 server memory kit of eight 16 GB registered ECC RDIMMs running at 6400 MT/s with CL52 latency and 1.1 V, validated for the Gigabyte MS34-CP0 motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Näytä 18 muuta kokoonpanoa
  • 128 GB total capacity with eight 16 GB modules for maximum server density
  • DDR5 6400 speed rated at CL52 latency for responsive data throughput
  • 1 V operating voltage reduces power draw under full load
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 288-pin RDIMM form factor verified for GIGABYTE MS34-CP0 motherboard

Exact-fit 128 GB DDR5 RDIMM kit

This 8-module kit delivers 128 GB of DDR5 6400 Registered ECC memory built for the GIGABYTE MS34-CP0 motherboard. Each 16 GB stick runs at 1.1 V with CL52 latency and a 1Rx8 organisation. The registered design offloads the memory controller so every slot can be populated at full rated speed.

Install in the board's prescribed slot order

Modules are standard 288-pin RDIMMs that seat like any server DIMM; no heat spreader means they fit tight clearance zones. The usual issue is ignoring the manual's population sequence — wrong order prevents the system from posting or limits capacity. Follow the vendor guide exactly and verify BIOS sees all 128 GB after first boot.

Confirm your MS34-CP0 revision and BIOS

This kit is validated for the GIGABYTE MS34-CP0 at DDR5 6400. Check the motherboard manual for maximum supported capacity per slot, approved DIMM population rules, and any required BIOS version before ordering. Systems needing UDIMM, SODIMM, non-ECC, or a different voltage will not accept these modules.

Kohokohdat

  • 128 GB total capacity with eight 16 GB modules for maximum server density
  • DDR5 6400 speed rated at CL52 latency for responsive data throughput
  • 1 V operating voltage reduces power draw under full load
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 288-pin RDIMM form factor verified for GIGABYTE MS34-CP0 motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 6400MHz PC5-51200 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the kit runs at DDR5 6400 CL52 1.1V after installation?

Enter the BIOS and verify the memory frequency reads 6400 MT/s, CAS latency shows CL52, and voltage is set to 1.10V; the registered ECC RDIMM design ensures the server recognises all 128 GB at the rated speed.

What does the package contain and is anything else required?

The box includes eight 16 GB DDR5 6400 PC5-51200 1Rx8 1.1V CL52 288-pin ECC registered RDIMMs for a total of 128 GB; no additional cables, brackets or software are needed for installation.

Which capacity kit should I choose for the GIGABYTE MS34-CP0?

This 128 GB kit (8 × 16 GB) matches the board's DDR5 6400 registered ECC RDIMM requirement; consult the motherboard manual for approved population order and maximum supported capacity before selecting a different size.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.