Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM DDR5 64GB 4800MHz CL40 2Rx4 ECC RDIMM 288-Pin 1.1V Supermicro H13SSH-E

SKU CH-YA1V-X33D2

64GB DDR5 4800MHz CL40 2Rx4 ECC registered RDIMM at 1.1V for Supermicro H13SSH-E motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity lets you fully populate supported slots
  • DDR5-4800 speed matches the memory controller's rated frequency
  • CL40 latency and 1.1 V voltage meet the board's timing spec
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly

Exact-Match Server Upgrade

This 64 GB DDR5 RDIMM delivers 4800 MHz speed at CL40 latency with 1.1 V operation. It is built for the Supermicro H13SSH-E motherboard and uses a 2Rx4 registered ECC layout that the memory controller expects for full-capacity recognition.

Replaces Mismatched or Smaller Kits

The module matches the board's required 288-pin registered form factor and precise rank, voltage and timing specifications. The jump is worth it when your current DIMMs are slower, unbuffered, non-ECC or do not populate every slot at the rated 4800 MHz speed.

Verify Population Rules First

Consult the motherboard manual for supported capacities per slot, approved DIMM installation order and maximum total memory before ordering. This kit suits workloads that need registered ECC stability; it does not fit systems requiring unbuffered UDIMMs, SODIMMs or non-ECC memory.

Kohokohdat

  • 64 GB capacity lets you fully populate supported slots
  • DDR5-4800 speed matches the memory controller's rated frequency
  • CL40 latency and 1.1 V voltage meet the board's timing spec
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will this 288-pin DDR5 RDIMM fit the Supermicro H13SSH-E motherboard slots?

Yes, it is a 288-pin Registered DDR5 DIMM built to the exact form factor the H13SSH-E requires, not a UDIMM or SODIMM.

What is the correct installation step that is often missed?

Follow the motherboard manual for the approved DIMM population order; the board must be populated in the specified sequence for the 64 GB module to be recognised at full capacity.

When should the module be replaced?

Replace it if the system fails to POST with the DIMM seated, if the OS logs uncorrectable ECC errors, or if a memory diagnostic reports persistent faults.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.