We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board DDR5 RDIMM memory module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM DDR5 64GB 4800MHz CL40 2Rx4 ECC RDIMM 288-Pin 1.1V Supermicro H13SSH-E

SKU CH-YA1V-X33D2

64GB DDR5 4800MHz CL40 2Rx4 ECC registered RDIMM at 1.1V for Supermicro H13SSH-E motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB

Show 30 more configurations
  • 64 GB capacity lets you fully populate supported slots
  • DDR5-4800 speed matches the memory controller's rated frequency
  • CL40 latency and 1.1 V voltage meet the board's timing spec
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly

Exact-Match Server Upgrade

This 64 GB DDR5 RDIMM delivers 4800 MHz speed at CL40 latency with 1.1 V operation. It is built for the Supermicro H13SSH-E motherboard and uses a 2Rx4 registered ECC layout that the memory controller expects for full-capacity recognition.

Replaces Mismatched or Smaller Kits

The module matches the board's required 288-pin registered form factor and precise rank, voltage and timing specifications. The jump is worth it when your current DIMMs are slower, unbuffered, non-ECC or do not populate every slot at the rated 4800 MHz speed.

Verify Population Rules First

Consult the motherboard manual for supported capacities per slot, approved DIMM installation order and maximum total memory before ordering. This kit suits workloads that need registered ECC stability; it does not fit systems requiring unbuffered UDIMMs, SODIMMs or non-ECC memory.

Highlights

  • 64 GB capacity lets you fully populate supported slots
  • DDR5-4800 speed matches the memory controller's rated frequency
  • CL40 latency and 1.1 V voltage meet the board's timing spec
  • 2Rx4 registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 288-pin DDR5 RDIMM fit the Supermicro H13SSH-E motherboard slots?

Yes, it is a 288-pin Registered DDR5 DIMM built to the exact form factor the H13SSH-E requires, not a UDIMM or SODIMM.

What is the correct installation step that is often missed?

Follow the motherboard manual for the approved DIMM population order; the board must be populated in the specified sequence for the 64 GB module to be recognised at full capacity.

When should the module be replaced?

Replace it if the system fails to POST with the DIMM seated, if the OS logs uncorrectable ECC errors, or if a memory diagnostic reports persistent faults.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.