NEMIX RAM
NEMIX RAM 16GB DDR5 5600MHz ECC Registered RDIMM Supermicro H14DST-FL memory upgrade
- 16GB
- 288-Pin DDR5 RDIMM
420,99 $
0.00538523BTC
Varastossa
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 16GB 4800MHz CL40 Supermicro H13SSF memory upgrade
16 GB DDR5-4800 registered ECC RDIMM validated for the Supermicro H13SSF motherboard
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCYes
Size 16GB
- 16GB
- 2TB 16X128GB
- 1.5TB 12X128GB
- 1.5TB 16X96GB
- 1.1TB 12X96GB
- 1TB 8X128GB
- 1TB 16X64GB
- 768GB 16X48GB
- 768GB 6X128GB
- 768GB 12X64GB
- 768GB 8X96GB
- 576GB 12X48GB
Näytä 30 muuta kokoonpanoa
- 576GB 6X96GB
- 512GB 16X32GB
- 512GB 4X128GB
- 512GB 8X64GB
- 384GB 12X32GB
- 384GB 8X48GB
- 384GB 6X64GB
- 384GB 4X96GB
- 288GB 6X48GB
- 256GB 8X32GB
- 256GB 16X16GB
- 256GB 2X128GB
- 256GB 4X64GB
- 192GB 6X32GB
- 192GB 4X48GB
- 192GB 12X16GB
- 192GB 2X96GB
- 128GB 4X32GB
- 128GB 8X16GB
- 128GB
- 128GB 2X64GB
- 96GB 2X48GB
- 96GB 6X16GB
- 96GB
- 64GB 2X32GB
- 64GB 4X16GB
- 64GB
- 48GB
- 32GB
- 32GB 2X16GB
- Exact-fit DDR5-4800 upgrade for Supermicro H13SSF
- Registered ECC RDIMM prevents silent data corruption
- 1Rx8 rank and 1.10 V match controller specs
- CL40 latency at rated 4800 MHz speed
- 288-pin DDR5 form factor installs in server slots
NEMIX RAM DDR5 ECC RDIMM 16GB
This 16GB DDR5 ECC RDIMM operates at 4800MHz with CL40 latency and 1.1V voltage. The 1Rx8 registered module uses a 288-pin form factor built with major OEM chips. It is validated for the Supermicro H13SSF motherboard and delivers the exact rank, timing, and voltage the memory controller expects.
Who this suits and who should look elsewhere
System builders upgrading a Supermicro H13SSF server will find this module matches the board's registered DIMM requirement and population rules. Buyers needing unbuffered UDIMMs, SODIMM form factors, or capacities beyond 16GB per slot should verify their platform documentation before ordering.
Behaviour under sustained load
Registered architecture reduces electrical load on the memory controller, allowing stable operation when all slots are populated at rated speed. ECC corrects single-bit errors in real time, preventing silent data corruption during continuous workloads. The 1.1V operating voltage supports consistent thermal characteristics in dense server configurations.
Kohokohdat
- Exact-fit DDR5-4800 upgrade for Supermicro H13SSF
- Registered ECC RDIMM prevents silent data corruption
- 1Rx8 rank and 1.10 V match controller specs
- CL40 latency at rated 4800 MHz speed
- 288-pin DDR5 form factor installs in server slots
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Tämän mallin muut versiot
5 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 ECC Registered RDIMM 1Rx8 CL46 1.1V 288-pin Supermicro H14DSG-OM memory upgrade
- 16GB
- 288-Pin DDR5 RDIMM
424,99 $
0.00543639BTC
Varastossa
NEMIX RAM
NEMIX RAM DDR5 16GB 5600MHz ECC Registered RDIMM CL46 1Rx8 1.1V Supermicro H14DSG-OD memory upgrade
- 16GB
- 288-Pin DDR5 RDIMM
429,99 $
0.00550035BTC
Varastossa
NEMIX RAM
NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 ECC RDIMM Supermicro H14DST-F memory upgrade
- 16GB
- 288-Pin DDR5 RDIMM
437,99 $
0.00560269BTC
Varastossa
NEMIX RAM
NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM Supermicro H13SSH memory upgrade
- 16GB
- 288-Pin DDR5 RDIMM
439,99 $
0.00562827BTC
VarastossaKysymyksiä tästä tuotteesta
My Supermicro H13SSF motherboard — does it need registered ECC DDR5 RDIMMs like this 288-pin CL40 1.10V module to work?
Yes, the H13SSF requires 288-pin DDR5 RDIMMs with ECC and registered buffering; this 16 GB CL40 1.10V kit matches that exact specification.
Can I keep my existing DDR5 4800 RDIMMs and add this 1Rx8 16 GB module without slowing the memory controller?
The board will run all populated slots at the lowest common speed and latency; matching 4800 MHz CL40 1Rx8 modules keeps the controller at its rated 4800 MT/s.
After installing the module, how do I confirm the server sees the full 16 GB at 4800 MHz with ECC active?
Check the BIOS memory info or run dmidecode — it should report 16 GB, 4800 MT/s, PC5-38400, registered ECC, 1Rx8, 1.10 V.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00501426BTC
Varastossa
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 $
0.00095926BTC
Varastossa