Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 16GB 4800MHz CL40 Supermicro H13SSF memory upgrade

SKU CH-005K-7GK1D

16 GB DDR5-4800 registered ECC RDIMM validated for the Supermicro H13SSF motherboard

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

Zobraziť ďalších 30 konfigurácií
  • Exact-fit DDR5-4800 upgrade for Supermicro H13SSF
  • Registered ECC RDIMM prevents silent data corruption
  • 1Rx8 rank and 1.10 V match controller specs
  • CL40 latency at rated 4800 MHz speed
  • 288-pin DDR5 form factor installs in server slots

NEMIX RAM DDR5 ECC RDIMM 16GB

This 16GB DDR5 ECC RDIMM operates at 4800MHz with CL40 latency and 1.1V voltage. The 1Rx8 registered module uses a 288-pin form factor built with major OEM chips. It is validated for the Supermicro H13SSF motherboard and delivers the exact rank, timing, and voltage the memory controller expects.

Who this suits and who should look elsewhere

System builders upgrading a Supermicro H13SSF server will find this module matches the board's registered DIMM requirement and population rules. Buyers needing unbuffered UDIMMs, SODIMM form factors, or capacities beyond 16GB per slot should verify their platform documentation before ordering.

Behaviour under sustained load

Registered architecture reduces electrical load on the memory controller, allowing stable operation when all slots are populated at rated speed. ECC corrects single-bit errors in real time, preventing silent data corruption during continuous workloads. The 1.1V operating voltage supports consistent thermal characteristics in dense server configurations.

Prednosti

  • Exact-fit DDR5-4800 upgrade for Supermicro H13SSF
  • Registered ECC RDIMM prevents silent data corruption
  • 1Rx8 rank and 1.10 V match controller specs
  • CL40 latency at rated 4800 MHz speed
  • 288-pin DDR5 form factor installs in server slots

Špecifikácie

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

My Supermicro H13SSF motherboard — does it need registered ECC DDR5 RDIMMs like this 288-pin CL40 1.10V module to work?

Yes, the H13SSF requires 288-pin DDR5 RDIMMs with ECC and registered buffering; this 16 GB CL40 1.10V kit matches that exact specification.

Can I keep my existing DDR5 4800 RDIMMs and add this 1Rx8 16 GB module without slowing the memory controller?

The board will run all populated slots at the lowest common speed and latency; matching 4800 MHz CL40 1Rx8 modules keeps the controller at its rated 4800 MT/s.

After installing the module, how do I confirm the server sees the full 16 GB at 4800 MHz with ECC active?

Check the BIOS memory info or run dmidecode — it should report 16 GB, 4800 MT/s, PC5-38400, registered ECC, 1Rx8, 1.10 V.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.