Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 384GB (8×48GB) 4800MHz CL40 1.1V 2Rx8 288-Pin Server Memory Upgrade

SKU CH-77Q1-6YYVS

Eight 48 GB DDR5 RDIMMs deliver 384 GB of registered ECC memory at 4800 MHz CL40 for the Supermicro H13SSH motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

Näytä 30 muuta kokoonpanoa
  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5 4800 MT/s CL40 at 1.1 V matches the memory controller specification
  • Registered ECC 2Rx8 architecture corrects single-bit errors under full load
  • 288-pin RDIMM form factor fits the Supermicro H13SSH motherboard slot
  • Major OEM Samsung, Micron or Hynix chips validated for enterprise stability

384 GB DDR5 ECC RDIMM kit

This 384 GB kit consists of eight 48 GB DDR5-4800 registered ECC modules built for servers that require 288-pin RDIMMs. It targets administrators upgrading a Supermicro H13SSH motherboard or a compatible platform that demands exact rank, voltage and timing alignment.

Capacity and headroom

Eight dual-rank 48 GB modules fill every slot on supported boards, delivering the full 384 GB at the rated 4800 MT/s speed with CL40 latency and 1.10 V operation. Registered buffering offloads the memory controller so all slots run stably at maximum population, while ECC corrects single-bit errors before they affect production workloads.

Verified Supermicro H13SSH fitment

The kit is validated for the Supermicro H13SSH motherboard, matching its 288-pin RDIMM form factor, 2Rx8 organisation, 1.10 V requirement and DDR5-4800 (PC5-38400) specification. Consult your system manual for approved DIMM population order and maximum supported capacity before installation.

Kohokohdat

  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5 4800 MT/s CL40 at 1.1 V matches the memory controller specification
  • Registered ECC 2Rx8 architecture corrects single-bit errors under full load
  • 288-pin RDIMM form factor fits the Supermicro H13SSH motherboard slot
  • Major OEM Samsung, Micron or Hynix chips validated for enterprise stability

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 8×48GB 2Rx8 RDIMM kit run at 4800MHz alongside existing DDR5 modules already installed in my Supermicro H13SSH?

The kit is spec-matched to the H13SSH memory controller for DDR5-4800 CL40 at 1.1V. Mixing ranks or speeds can force the controller to down-clock all slots, so populate remaining channels with identical 2Rx8 4800MHz modules for full rated performance.

How can I confirm the 384GB kit is detected at full speed and ECC is active after installation?

Enter the BIOS and verify total memory reads 384GB, speed shows 4800MT/s, and ECC status reports enabled. In the OS, run dmidecode or lshw to confirm each DIMM registers as 48GB 2Rx8 Registered ECC at 4800MHz.

What exactly ships in the box and do I need any extra brackets or cables for the H13SSH?

The box contains eight 48GB 288-pin DDR5 RDIMM modules — no heat spreaders, brackets, cables or tools. The H13SSH uses standard RDIMM slots, so nothing else is required beyond following the board's population order in its manual.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.