저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 384GB (8×48GB) 4800MHz CL40 1.1V 2Rx8 288-Pin Server Memory Upgrade

SKU CH-77Q1-6YYVS

Eight 48 GB DDR5 RDIMMs deliver 384 GB of registered ECC memory at 4800 MHz CL40 for the Supermicro H13SSH motherboard

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5 4800 MT/s CL40 at 1.1 V matches the memory controller specification
  • Registered ECC 2Rx8 architecture corrects single-bit errors under full load
  • 288-pin RDIMM form factor fits the Supermicro H13SSH motherboard slot
  • Major OEM Samsung, Micron or Hynix chips validated for enterprise stability

384 GB DDR5 ECC RDIMM kit

This 384 GB kit consists of eight 48 GB DDR5-4800 registered ECC modules built for servers that require 288-pin RDIMMs. It targets administrators upgrading a Supermicro H13SSH motherboard or a compatible platform that demands exact rank, voltage and timing alignment.

Capacity and headroom

Eight dual-rank 48 GB modules fill every slot on supported boards, delivering the full 384 GB at the rated 4800 MT/s speed with CL40 latency and 1.10 V operation. Registered buffering offloads the memory controller so all slots run stably at maximum population, while ECC corrects single-bit errors before they affect production workloads.

Verified Supermicro H13SSH fitment

The kit is validated for the Supermicro H13SSH motherboard, matching its 288-pin RDIMM form factor, 2Rx8 organisation, 1.10 V requirement and DDR5-4800 (PC5-38400) specification. Consult your system manual for approved DIMM population order and maximum supported capacity before installation.

주요 특징

  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5 4800 MT/s CL40 at 1.1 V matches the memory controller specification
  • Registered ECC 2Rx8 architecture corrects single-bit errors under full load
  • 288-pin RDIMM form factor fits the Supermicro H13SSH motherboard slot
  • Major OEM Samsung, Micron or Hynix chips validated for enterprise stability

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 8×48GB 2Rx8 RDIMM kit run at 4800MHz alongside existing DDR5 modules already installed in my Supermicro H13SSH?

The kit is spec-matched to the H13SSH memory controller for DDR5-4800 CL40 at 1.1V. Mixing ranks or speeds can force the controller to down-clock all slots, so populate remaining channels with identical 2Rx8 4800MHz modules for full rated performance.

How can I confirm the 384GB kit is detected at full speed and ECC is active after installation?

Enter the BIOS and verify total memory reads 384GB, speed shows 4800MT/s, and ECC status reports enabled. In the OS, run dmidecode or lshw to confirm each DIMM registers as 48GB 2Rx8 Registered ECC at 4800MHz.

What exactly ships in the box and do I need any extra brackets or cables for the H13SSH?

The box contains eight 48GB 288-pin DDR5 RDIMM modules — no heat spreaders, brackets, cables or tools. The H13SSH uses standard RDIMM slots, so nothing else is required beyond following the board's population order in its manual.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.