Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR5 RDIMM sticks, no heat spreaders, 288-pin gold contacts, 1.1V registered ECC memory kit

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 512GB (8x64GB) 6400 CL52 1.1V 2Rx4 Registered memory upgrade

SKU CH-GK4N-P0A4F

Eight 64 GB DDR5 RDIMMs deliver 512 GB of registered ECC memory at 6400 MT/s with CL52 latency and 1.1 V operation for the Gigabyte MZ73-LM2

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 512GB 8X64GB

Näytä 24 muuta kokoonpanoa
  • 512 GB total capacity from eight 64 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput for GIGABYTE MZ73-LM2
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's voltage spec for reliable POST
  • 288-pin RDIMM form factor fits the board's registered DIMM slots exactly

Exact-fit 512GB DDR5 kit for GIGABYTE MZ73-LM2

This 512GB kit delivers eight 64GB DDR5-6400 RDIMMs tuned to CL52 at 1.1V. The 2Rx4 registered ECC design matches the GIGABYTE MZ73-LM2 motherboard's required pin-out, rank structure and voltage so the system recognises full capacity at rated speed without manual tuning.

Sustained enterprise stability under full population

Registered buffering offloads the memory controller, allowing all eight slots to run continuously at 6400 MT/s without signal degradation. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during prolonged, memory-intensive workloads.

Bare-module build for dense server chassis

Modules ship without heat spreaders, reducing height for tight 1U or blade layouts where airflow is managed by the chassis. The 288-pin RDIMM keying prevents accidental insertion into UDIMM or SODIMM slots, and the kit's exact part-number match simplifies compliance with the board's population rules.

Kohokohdat

  • 512 GB total capacity from eight 64 GB modules for dense server workloads
  • DDR5 6400 speed with CL52 latency delivers rated throughput for GIGABYTE MZ73-LM2
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the motherboard's voltage spec for reliable POST
  • 288-pin RDIMM form factor fits the board's registered DIMM slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much power does the 1.10 V DDR5 6400 kit draw when all eight modules run continuously?

Each module operates at 1.10 V; total power depends on your server's memory controller and workload, so consult the platform's specifications for full-system figures.

What motherboard slot and population rules are required for this 288-pin RDIMM kit to function?

The kit requires a motherboard with eight DDR5 RDIMM slots — such as the GIGABYTE MZ73-LM2 — populated according to that board's approved DIMM order.

Will the registered ECC design work alongside older DDR5 RDIMMs already installed in my server?

Mixing ranks, speeds or vendors is not recommended; the board's memory controller expects identical 2Rx4 CL52 modules in every populated slot for stable operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.