Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM ME44800-328K2 64GB (2×32GB) DDR5 5600 ECC UDIMM memory upgrade

SKU CH-A11Q-1AYCN

A 64 GB DDR5-5600 ECC UDIMM kit (2×32 GB, CL46, 1.1 V, 2Rx8) validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from two 32 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth rating
  • ECC protection detects and corrects single-bit errors
  • 1 V operation at CL46 latency timing
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Exact-match upgrade for Supermicro X14SAZ-TLN4F

This 64GB kit contains two 32GB DDR5 5600 ECC UDIMM modules built to the precise rank, voltage and timing the Supermicro X14SAZ-TLN4F memory controller expects. It is intended for administrators and workstation users who need verified fitment and error-correcting reliability in that specific platform.

Unbuffered UDIMM form factor with no heat spreader

The 288-pin unbuffered DIMMs operate at 1.10V with CL46 latency and a 2Rx8 organisation, matching the board's native DDR5 5600 specification. Because they lack a heat spreader, clearance inside dense chassis is maximised, but airflow across the modules must be provided by the system fans.

DDR5 5600 interface limits capacity

The memory controller on the X14SAZ-TLN4F defines the maximum supported density per slot and the allowed population order, so total capacity cannot exceed what the firmware permits. ECC corrects single-bit errors on the fly, yet it does not protect against multi-bit failures or replace the need for a validated DIMM population plan.

Kohokohdat

  • 64 GB total capacity from two 32 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth rating
  • ECC protection detects and corrects single-bit errors
  • 1 V operation at CL46 latency timing
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR5 speed and data rate does this kit run at?

The kit is rated DDR5 5600 with a PC5-44800 data rate, so the memory controller will operate at 5600 MT/s when the motherboard supports that speed.

What physical slot and pin count do these modules need?

Each module is a 288-pin DDR5 UDIMM, so it fits a standard desktop DDR5 DIMM slot and will not work in RDIMM or SODIMM sockets.

How do I install this 2×32 GB kit on the Supermicro X14SAZ-TLN4F, and what step is often missed?

Populate the slots in the exact order shown in the motherboard manual — usually the two primary channels first — and ensure both modules click fully into place; skipping the prescribed population order is the common mistake that prevents the system from recognising the full 64 GB.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.