Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM ME44800-328K2 64GB (2×32GB) DDR5 5600 ECC UDIMM memory upgrade

SKU CH-A11Q-1AYCN

A 64 GB DDR5-5600 ECC UDIMM kit (2×32 GB, CL46, 1.1 V, 2Rx8) validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from two 32 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth rating
  • ECC protection detects and corrects single-bit errors
  • 1 V operation at CL46 latency timing
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Exact-match upgrade for Supermicro X14SAZ-TLN4F

This 64GB kit contains two 32GB DDR5 5600 ECC UDIMM modules built to the precise rank, voltage and timing the Supermicro X14SAZ-TLN4F memory controller expects. It is intended for administrators and workstation users who need verified fitment and error-correcting reliability in that specific platform.

Unbuffered UDIMM form factor with no heat spreader

The 288-pin unbuffered DIMMs operate at 1.10V with CL46 latency and a 2Rx8 organisation, matching the board's native DDR5 5600 specification. Because they lack a heat spreader, clearance inside dense chassis is maximised, but airflow across the modules must be provided by the system fans.

DDR5 5600 interface limits capacity

The memory controller on the X14SAZ-TLN4F defines the maximum supported density per slot and the allowed population order, so total capacity cannot exceed what the firmware permits. ECC corrects single-bit errors on the fly, yet it does not protect against multi-bit failures or replace the need for a validated DIMM population plan.

I korthet

  • 64 GB total capacity from two 32 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth rating
  • ECC protection detects and corrects single-bit errors
  • 1 V operation at CL46 latency timing
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

What DDR5 speed and data rate does this kit run at?

The kit is rated DDR5 5600 with a PC5-44800 data rate, so the memory controller will operate at 5600 MT/s when the motherboard supports that speed.

What physical slot and pin count do these modules need?

Each module is a 288-pin DDR5 UDIMM, so it fits a standard desktop DDR5 DIMM slot and will not work in RDIMM or SODIMM sockets.

How do I install this 2×32 GB kit on the Supermicro X14SAZ-TLN4F, and what step is often missed?

Populate the slots in the exact order shown in the motherboard manual — usually the two primary channels first — and ensure both modules click fully into place; skipping the prescribed population order is the common mistake that prevents the system from recognising the full 64 GB.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.