Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM ME44800-328K2 64GB (2×32GB) DDR5 5600 ECC UDIMM memory upgrade

SKU CH-A11Q-1AYCN

A 64 GB DDR5-5600 ECC UDIMM kit (2×32 GB, CL46, 1.1 V, 2Rx8) validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity from two 32 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth rating
  • ECC protection detects and corrects single-bit errors
  • 1 V operation at CL46 latency timing
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Exact-match upgrade for Supermicro X14SAZ-TLN4F

This 64GB kit contains two 32GB DDR5 5600 ECC UDIMM modules built to the precise rank, voltage and timing the Supermicro X14SAZ-TLN4F memory controller expects. It is intended for administrators and workstation users who need verified fitment and error-correcting reliability in that specific platform.

Unbuffered UDIMM form factor with no heat spreader

The 288-pin unbuffered DIMMs operate at 1.10V with CL46 latency and a 2Rx8 organisation, matching the board's native DDR5 5600 specification. Because they lack a heat spreader, clearance inside dense chassis is maximised, but airflow across the modules must be provided by the system fans.

DDR5 5600 interface limits capacity

The memory controller on the X14SAZ-TLN4F defines the maximum supported density per slot and the allowed population order, so total capacity cannot exceed what the firmware permits. ECC corrects single-bit errors on the fly, yet it does not protect against multi-bit failures or replace the need for a validated DIMM population plan.

Punti di forza

  • 64 GB total capacity from two 32 GB modules
  • DDR5 5600 speed with PC5-44800 bandwidth rating
  • ECC protection detects and corrects single-bit errors
  • 1 V operation at CL46 latency timing
  • Verified fit for Supermicro X14SAZ-TLN4F motherboard

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC UDIMM KIT

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What DDR5 speed and data rate does this kit run at?

The kit is rated DDR5 5600 with a PC5-44800 data rate, so the memory controller will operate at 5600 MT/s when the motherboard supports that speed.

What physical slot and pin count do these modules need?

Each module is a 288-pin DDR5 UDIMM, so it fits a standard desktop DDR5 DIMM slot and will not work in RDIMM or SODIMM sockets.

How do I install this 2×32 GB kit on the Supermicro X14SAZ-TLN4F, and what step is often missed?

Populate the slots in the exact order shown in the motherboard manual — usually the two primary channels first — and ensure both modules click fully into place; skipping the prescribed population order is the common mistake that prevents the system from recognising the full 64 GB.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.