NEMIX RAM DDR5 5600 128GB 2x64GB CL46 ECC RDIMM Supermicro X14SDV-36CE-SP3F memory upgrade
- 128GB (2 x 64GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
128 GB registered ECC DDR5 kit (4 × 32 GB) at 5600 MHz CL46 1.1 V, validated for the Supermicro X14SDW-40C-SP9F motherboard
Size 128GB 4X32GB
The NEMIX RAM MR44800-328K4 is a 128GB kit built from four 32GB DDR5 RDIMMs. It targets administrators upgrading the Supermicro X14SDW-40C-SP9F motherboard with registered ECC memory.
Each module runs at DDR5 5600 (PC5-44800) with a CL46 latency at 1.1V in a 2Rx8 configuration. The 288-pin registered design offloads the memory controller so all slots can be populated at rated speed while ECC corrects single-bit errors.
This kit suits technicians who need the exact rank, voltage and timing the X14SDW-40C-SP9F expects for full-capacity operation. It is not for systems that require unbuffered UDIMMs, SODIMMs, non-ECC memory or a different DDR generation.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-328K4 |
| Capacity | 128GB (4 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The modules will run at DDR5-5600 (PC5-44800) with CL46 timing at 1.1 V, giving the full rated bandwidth the board's memory controller expects when all four slots are populated.
The registered 288-pin DDR5 RDIMM form factor only fits server boards wired for RDIMMs; it will not work in UDIMM or SODIMM slots and the board must support 2Rx8 registered ECC population rules.
Each module is a standard-height 288-pin RDIMM without a heat spreader, so it fits the regular DIMM slot pitch on the X14SDW-40C-SP9F; verify the motherboard manual for any tall CPU-cooler overlap before installing all four sticks.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?