We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM MR44800-328K4 128GB 4x32GB DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMM memory upgrade

SKU CH-8CQJ-924DF

128 GB registered ECC DDR5 kit (4 × 32 GB) at 5600 MHz CL46 1.1 V, validated for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128 GB total capacity from four 32 GB modules for maximum server density
  • DDR5 5600 speed (PC5-44800) runs at the motherboard's rated frequency
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and stabilises full population
  • 1 V operating voltage matches the platform specification for efficient operation
  • Validated for Supermicro X14SDW-40C-SP9F motherboard ensuring correct fit and recognition

Server Memory Kit

The NEMIX RAM MR44800-328K4 is a 128GB kit built from four 32GB DDR5 RDIMMs. It targets administrators upgrading the Supermicro X14SDW-40C-SP9F motherboard with registered ECC memory.

Registered ECC DDR5 5600

Each module runs at DDR5 5600 (PC5-44800) with a CL46 latency at 1.1V in a 2Rx8 configuration. The 288-pin registered design offloads the memory controller so all slots can be populated at rated speed while ECC corrects single-bit errors.

For Supermicro X14SDW Builds

This kit suits technicians who need the exact rank, voltage and timing the X14SDW-40C-SP9F expects for full-capacity operation. It is not for systems that require unbuffered UDIMMs, SODIMMs, non-ECC memory or a different DDR generation.

Highlights

  • 128 GB total capacity from four 32 GB modules for maximum server density
  • DDR5 5600 speed (PC5-44800) runs at the motherboard's rated frequency
  • Registered ECC design with 2Rx8 organisation corrects single-bit errors and stabilises full population
  • 1 V operating voltage matches the platform specification for efficient operation
  • Validated for Supermicro X14SDW-40C-SP9F motherboard ensuring correct fit and recognition

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 5600 MT/s rating mean once the kit is installed in my Supermicro X14SDW-40C-SP9F?

The modules will run at DDR5-5600 (PC5-44800) with CL46 timing at 1.1 V, giving the full rated bandwidth the board's memory controller expects when all four slots are populated.

How does the 288-pin RDIMM interface limit what I can do with this memory?

The registered 288-pin DDR5 RDIMM form factor only fits server boards wired for RDIMMs; it will not work in UDIMM or SODIMM slots and the board must support 2Rx8 registered ECC population rules.

What physical clearance does the 4×32 GB kit need inside the chassis?

Each module is a standard-height 288-pin RDIMM without a heat spreader, so it fits the regular DIMM slot pitch on the X14SDW-40C-SP9F; verify the motherboard manual for any tall CPU-cooler overlap before installing all four sticks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.