Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

OWC

OWC 128GB (4x32GB) DDR4 2666MHz CL19 ECC LRDIMM 1.2V 288-pin server RAM

SKU CH-7Z3Q-CYFGK

A 128GB quad-channel kit of four 32GB DDR4 2666MHz CL19 ECC load-reduced DIMMs for servers and workstations

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • ECC load-reduced design protects data integrity in servers
  • 128 GB total capacity across four 32 GB modules for heavy workloads
  • DDR4 2666 MHz CL19 speed balances throughput and latency
  • 2 V operation lowers power draw in dense configurations
  • Backward compatible with 2133 MHz and 2400 MHz systems

Server ECC LRDIMM kit

This OWC kit supplies 128GB of DDR4 server memory across four 32GB load-reduced DIMMs. It is built for workstations, servers and NAS systems that require ECC error correction and registered buffering. The modules run at 2666MHz with CL19 latency and operate at 1.2V. Standard desktop computers cannot use this memory.

Check platform compatibility

Verify that your motherboard supports DDR4 288-pin ECC LRDIMM modules and accepts 4Rx4 load-reduced ranks. This kit will not work with unbuffered or standard registered DIMMs and cannot be mixed with them. The platform must also be able to address the full 128GB capacity across four slots.

Build integration

The four-module kit populates four DIMM slots and leaves additional slots free for future expansion if the board provides them. Backward compatibility with 2133MHz and 2400MHz bus speeds allows the memory to run in older DDR4 platforms without changes. No heat spreaders are fitted, so airflow clearance is minimal.

Kohokohdat

  • ECC load-reduced design protects data integrity in servers
  • 128 GB total capacity across four 32 GB modules for heavy workloads
  • DDR4 2666 MHz CL19 speed balances throughput and latency
  • 2 V operation lowers power draw in dense configurations
  • Backward compatible with 2133 MHz and 2400 MHz systems

Tekniset tiedot

BrandOWC
Part Number2L6D44R4128S
Capacity128GB (4 x 32GB)
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Multi-channel KitDual Channel Kit
Heat SpreaderNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What comes in the box and do I need anything else to install the 4x32GB modules?

The kit includes four 32GB DDR4 2666MHz CL19 ECC LRDIMM modules for a total of 128GB. No extra parts are required if your server or workstation has four free 288-pin DDR4 slots that support load-reduced ECC memory.

How do I choose between the 2666MHz rating and the listed backward compatibility speeds?

The modules run at 2666MHz (PC4-21300) by default and will automatically operate at 2400MHz or 2133MHz if your platform only supports those lower speeds.

What does the CL19 latency mean for real-world server performance?

CL19 indicates 19 clock cycles of CAS latency at 2666MHz, giving a baseline access delay. Actual throughput depends on your CPU memory controller, channel population and workload, but the JEDEC-compliant timing ensures stable operation in supported server and workstation platforms.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.